subject: In All Probability The Top Waste Baler Supplier In The World! What Electrical Power Source Is Perfec [print this page] I have been working in the Plastic Recycling Industry, for a number of time. I genuinely believe myself to be pretty clued-up about the diverse Plastic baler Brands supplied around the world.
One of the key problems with small waste baler equipment, is the motor size. Generally, a small plastic baler is powered with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They as a rule run at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The core motives for using a small 240v motor is because it is somewhat less costly and the majority of small establishments don't have a 3 Phase Power Supply.
These small waste balers can turn out cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. A large amount of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their cardboard baler, would be much more efficient and reliable in the long-term.
An alternative catch that often occurs, is particular sizeable warehouses will need a much larger cardboard baler appliance, but they also don't possess any 3 Phase Power Supply. They may necessitate a V250 or V500 Waste Baler, because their amount of cardboard or plastic waste is much higher.
Several manufacturers do manufacture the V250 waste baler, using a 240v motor, but this can prove expensive and unreliable in the long term. This is because the motor runs so hot and both the capacitor and electric motor can burn out and be pricey to repair.
The V500 Mill Size Baler is in general ALWAYS built with a 3 phase motor. Although some sites don't have the 3 phase electric power supply. There is either a big expense to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent months, I have worked with a specific Recycling Baler Equipment Manufacturer closely, named Strong Recycling Balers Ltd. They are UK based and deliver cardboard baler equipment Worldwide. Strong Recycling Balers ltd now resolve every one of the problems discussed with a few very advanced techniques.
Both their smaller waste balers, e.g. V40i and V70i, are fitted standard with a 3 phase motor. Although there is a 415v 3 phase electric motor - the machines only uses a single phase 220/240v electric power supply. In addition, the V250 and V500 (Mill Size Baler) are naturally fitted with 415v 3 phase electric motors, but it is possible to apply either a 220/240v single phase or 415v 3phase on this machinery. It is your selection at the order stage.
So no matter what your requirements for a recycling machine ranging from small to mill size, I would encourage everyone to look on the Strong Recycling Balers site. This is because they will inevitably apply better electric motors in assembly and your electric power supply needs can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
