subject: Possibly The Top Recycling Baler Equipment Providers In The World! Which Electrical Power Supply Is [print this page] I have been working in the Waste Recycling Industry, for a number of years. I genuinely consider myself to be pretty well-informed about the diverse Mill size baler Brands made around the world.
One of the key problems with small cardboard balers, is the motor size. By and large, a small recycling machine is driven with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage motors is not so powerful. They more often than not function at a very high temperature and it is a common problem for the capacitors (and even the motors) to burn out. The chief reasons for using a small 240v motor is because it is slightly less expensive and most of small establishments don't have a 3 Phase Power Supply.
These small waste baler machines can turn out cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are appropriate for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. Nearly everyone of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their recycling baler machinery, would be much more efficient and reliable in the long-term.
A different hindrance that often occurs, is particular sizeable warehouses will have need of a much larger waste baler machine, but they also don't possess any 3 Phase Power Supply. They may necessitate a V250 or V500 Waste Baler, because their amount of cardboard or plastic waste is much higher.
Certain manufacturers do construct the V250 waste baler, using a 240v motor, but this can prove costly and inefficient in the long term. This is because the electric motor works so hot and both the capacitor and electric motor can burn out and be pricey to repair.
The V500 Waste Baler Machine is normally ALWAYS built with a 3 phase electric motor. But several sites don't possess the 3 phase electric power supply. There is either a big cost to have the power supply modifications or the company has to do without their ideal baler; and can't recycle effectively.
In recent times, I have monitored a specific Cardboard Baler Machine Provider closely, named Strong Recycling Balers Ltd. They are UK based and deliver waste baler equipment Worldwide. Strong Recycling Balers ltd now solve every one of the problems discussed with a number of very cutting edge techniques.
Both their smaller waste balers, such as V40i and V70i, are fitted standard with a 3 phase motor. While there is a 415v 3 phase motor - the equipment only needs a single phase 220/240v electric power supply. Furthermore, the V250 and V500 (Mill Size Baler) are not surprisingly fitted with 415v 3 phase motors, but it is possible to apply either a 220/240v single phase or 415v 3phase on this machine. It is your selection at the order stage.
So no matter what your requirements for a waste baler ranging from small to mill size, I would encourage everybody to look on the Strong Recycling Balers internet site. This is because they will inevitably utilize better electric motors in construction and your electric power supply needs can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
