subject: In All Probability The Greatest Mill Size Balers Supplier In The World! Which Electrical Power Sourc [print this page] I have been working in the Cardboard Recycling Business, for a number of years. I genuinely judge myself to be quite familiar about the diverse Cardboard balers Brands built around the world.
One of the foremost problems with small recycling baler equipment, is the electric motor size. Mostly, a small plastic baler is driven with a 220/240v motor, in Europe and 110v motor, in USA. The throughput and torque of these small voltage electric motors is not so powerful. They mostly function at a very high temperature and it is a common problem for the capacitors (and also the motors) to burn out. The foremost reasons for using a small 240v motor is because it is a little cheaper and most of small establishments don't have a 3 Phase Power Supply.
These small cardboard baler machines can make cardboard bales ranging from 20kg to 80kg and plastic bales ranging from 40k to 150kg. They are suitable for: small businesses, schools, colleges, manufacturers, hotels, restaurants, shops, transport companies etc. The majority of these establishments are not blessed with a 3 Phase Power Supply. But if they were, then a 3 Phase motor on their waste baler, would be much more efficient and dependable in the long term.
Another snag that often occurs, is certain sizeable warehouses will have need of a much bigger plastic baler appliance, but they also don't possess any 3 Phase Power Supply. They may require a V250 or V500 Mill Size Baler, because their volume of cardboard or plastic waste is much higher.
A number of manufacturers do construct the V250 waste baler, using a 240v motor, but this can prove expensive and inefficient in the long term. This is because the motor runs so hot and both the capacitor and electric motor can burn out and be dear to fix.
The V500 Plastic Baler is in the main ALWAYS made with a 3 phase electric motor. Although a number of locations don't have the 3 phase power supply. There is either a great expense to have the power supply modifications or the company has to do without their ideal baler; and can't recycle efficiently.
In recent months, I have monitored a particular Plastic Baler Machine Provider closely, known as Strong Recycling Balers Ltd. They are UK based and supply mill size balers Worldwide. Strong Recycling Balers ltd now resolve every one of the problems above with particular very cutting edge methods.
Both their smaller waste balers, e.g. V40i and V70i, are fitted standard with a 3 phase motor. While there is a 415v 3 phase electric motor - the machinery only uses a single phase 220/240v electric power supply. Additionally, the V250 and V500 (Mill Size Baler) are naturally fitted with 415v 3 phase electric motors, but it is possible to apply either a 220/240v single phase or 415v 3phase on this machinery. It is your option at the order stage.
So whatever your requirements for a waste baler machine ranging from small to mill size, I would urge everyone to browse on the Strong Recycling Balers web site. This is because they will inevitably use superior motors in construction and your power supply wants can always be easily catered for. You can also call them directly on Tel +44 1384 567773.
