subject: Mold Inspection Ny [print this page] Mold inspection NY Mold inspection NY
Mold Inspection NY: Getting Rid of Black Mold Yourself
It didn't take much for me to think about mold the instant I saw a dark yellowish green stained around my leaky window frame. It really wasn't that much of a leap to think that the condensation that I had been ignoring for the last two years had finally given in to mold. I had a couple of choices on my hands. One of them was to call a mold inspection NY service and the other was to have a go at it on my own. Although I had heard some great things about a mold inspection NY service in my neighborhood itself, it was not like me to not try my own hand at something before calling the professionals in.
I realized that I needed to learn everything about mold that there was to in order to fight this silent killer without the expense of a lengthy and expensive mold inspection NY service. I realize that the first task was to identify the source of the mold. Well that was easy enough! I could see the condensation around the window frame and it didn't take a genius or a mold inspection NY service to tell me that right there was the source of my mold.
Now that I knew where to begin, I needed to make sure that the area I was cleaning was well ventilated. I also knew from having talked to a mold inspection NY service that I needed to address the source of the mold first. What this translates to is fixing the leaky window frame before I did anything else. This would require stripping out the window frame and re applying a new one with a tight seal. Once the seal along with the window was he placed correctly asked for the advice of the mold inspection NY service, I realized that I needed to invest in protective eyewear, protective gloves and an N- 95 respirator before I even approach the mold.
Following the advice of a mold removal guide, I proceeded to wet the drive mold in order to loosen it and gave the entire area a once over with soap and water. Fortunately for me, the mold itself was contained in a small area around the window frame and did not involve the drywall per se. Once the area was clean, I used a bleach wipe to kill any surface mold that might have been left behind. Finally I was grateful that it was a small enough task that I could handle on my own, without needing the expertise of a mold inspection NY service.
