subject: Information Of Industrial Immersion Heaters And Oil Immersion Heaters [print this page] Elmec tubular heaters are available in SS304, SS316, SS321, Inconel & Incolloy sheath.Tubular heating elements are available for various industrial & domestic applications. Every heaters are made with quality raw material like Tubes, MGO powder, Resistance wire, Terminal pins and ets,. Our heaters are specially cared by our production team to ensure for long life, Uniform heating , Energy efficient. We build every technically possible heaters as per your requirements.
All our heaters are tested for High voltage test up to 2000 Volts and meger 100 Meg ohms to infinity. Elmec design and manufacture High Watt Density Cartridge Heaters, Hot Runner Heaters, Infrared heaters, Linear Displacement Transducer, Leaf Proof Nozzle Heaters, Manifold Heaters, Split Type Cartridge Heaters, Tubular Heaters, Ceramic Band Heaters, Mica Band Heaters, Industrial Water Immersion Heaters,Oil Immersion Heaters, Linear Displacement Potentio Meter, Ceramic Infrared Heaters, Temperature Sensor, Non Contact Thermocouples,PID Temperature Controllers, Thermal Imaging Systems, Temperature Controllers,Thermocouple,Heaters.
Highly compressed Tubular heaters are the most advanced heating solution for injection manifolds. The square section tubular heater allows excellent heat exchange between the surfaces of heater and manifold. These heaters are installed by careful hammering on the heaters along with square section grove over the manifold and pressed to hold the heaters in position and to get good surface contact, which results in good thermal exchange and increases the heater life and reduces energy loss.
Features
Nickel Chrome/Kanthal resistance wire
Immersion Heaters are available with screw plug flanges
Air Heaters are available with MS or SS fins
Tubular heating elements with additional teflon sleeving is available for heating corrosive chemicals
Applications
Plastic Processing machinery.
Water and Oil Heating Appliances.
Packaging machineries
Vending Machines.
Dies and Tools.
Heating Chemical Solutions.
Ovens & Dryers
Kitchen equipments
Medical equipments
Used in many other applications.
When Ordering please specify
Type of Heater
Wattage and Voltage
Dia & length of the heater
INDUSTRIAL WATER IMMERSION HEATERS
TypeWatts VoltageDepth of ImmersionFlange
EH/IHCU 20/22 2000230220mm 1 1/4 " BSPT
EH/IHCUS 20/222000230220mm1 1/2" BSPT
EH/IHCU 30/283000230280mm1 1/4 " BSPT
EH/IHCUS 30/223000230/400(Y)220mm1 1/2" BSPT
EH/IHCU 40/264000230/400(Y)260mm2" BSPT
EH/IHCU 50/325000230/400(Y)320mm2" BSPT
EH/IHCU 60/386000230/400(Y)380mm2" BSPT
EH/IHCU 90/559000230/400(Y)550mm2" BSPT
EH/IHCU 90/619000230/400(Y)610mm2" BSPT
OIL IMMERSION HEATERS
TypeWatts VoltageDepth of ImmersionMounting
EH/OHST 10/43.81000230438mm1 1/4 " BSPT
EH/OHST 15/43.8 1500230220mm1 1/2" BSPT
EH/OHST 20/43.8 2000230280mm1 1/4 " BSPT
EH/OHST 30/43.83000230/400(Y)220mm1 1/2" BSPT
EH/OHST 40/57.54000230/400(Y)575mm2" BSPT
EH/OHST 50/57.55000230/400(Y)320mm2" BSPT
EH/OHST 60/57.5 6000230/400(Y)380mm2" BSPT
EH/OHST 90/71.29000230/400(Y)550mm2" BSPT
LONG LIFE AIR HEATERS
"U" Tube Air Heaters Made out of Chrome Nickel Steel Tube with Maximum Surface Temperature up to 650C
TypeWattsVoltageDepth of U Tube Air Heaters Mounting
Length mm Breadth mmHeight mmTwo adjustable brackets.
