subject: Why Led Tube Is The Best? [print this page] 1 Common tube 1 Common tube
Each end of a filament mild, the mild is packed with information of argon and mercury vapor thin, pipe surfaces protected with neon dirt, the gas between the two conductive filament when the sun mild, so that a sleek phosphor recognizable.
Working functions of the most popular fluorescent: when it stimulate ,it need a Artist and it only permitted to pass little existing while the present on the pipe itself is lower then each end . Both completes of the filament with neon pipe joints, cup pipe surfaces protected with a aspect of thin constant neon dirt, the pipe was treated into machine of 10-3-10-4 mm Hg after a bit of inert gas packed, but also into the find liquid mercury. Ballast is an iron-core inductor rings, the characteristics of the inductor existing in the rings changes, due to attractive flux in the rings will change, resulting in triggered electromotive power towards existing in the other, thereby preventing the existing changes.
Beginning change from the aspect in the schedule, such as a neon launch pipe in similar with a capacitor designed of the aspect of capacitance on the power to remove electro-magnetic interference and the growth of oscillation pattern with ballast to increase the starting defeat present plenitude. Reduce an electrode made up of double-metal, the use of neon mild launch heating, dual steel in the make, resulting in the existing mutation of ballast involved to the pipe and produce high-voltage defeat completes. When the mild access schedule after the beginning started to glow launch between two electrodes, so that warm growth of two-metal get in touch with the very get in touch with of set, so the power, ballast, and beginning filament form a close pattern, the existing the filament preheating, when the heating length of 1-3 a few moments, the beginning of the glow launch between two electrodes off, followed by dual steel cooling off with a very quiet get in touch with, remove the moment when the two electrodes , existing in the schedule immediately disappeared, so the ballast to produce a high-voltage defeat, which overlapped with the power, involved to the pipe completes so that the inert gas ion technology inside the pipe due to arc launch, glow in the frequent course of ballast self-inductance device also results in support the existing in the schedule. 2 .Led pipe Led pipe with top quality, resilient, energy-saving as the main functions of the projector screen position adjustment wide range, 15W illumination relative to an typical 40W led pipe . Warm, moisture and waterproof, leakproof. Use voltage: 110V, 220V recommended, cover recommended cup or PC material. As with typical neon mild.
LED ltube mild is using the most innovative engineering, digital design, protecting up to 70% or more, 12W of LED neon mild strength relative to 40W neon pipe (used for ballast and beginning, 36W neon real intake Power for 42W to 44W). LED neon mild way of life of more than 10 times frequent, almost maintenance-free, no need to frequently alternative the mild, ballast and beginning. Natural semiconductor mild, mild and sleek, authentic wide range is positive to protection of the client's perspective and health. 6000K cold mild gives the feeling of cool recognizable, user-friendly design of the illumination modifications, but also help to focus and improve performance.
Currently, evaluate with LED pipe and traditional neon pipe , the advantages are as follows: 1. Energy-saving . 2. durability . 3. Good effectiveness, because the size of a little single LED can be designed into any shape. 4. Response time is short, is ns (nanosecond) level of reaction time, and typical illumination is ms (millisecond) reaction time levels. 5. Environmental protection, no dangerous materials, waste easier to use. 6. Vivid, shiny, authentic colour, a narrow spectral wide range, and through the red, green and azure colour combining into an exciting or white. Disadvantages: 1. Expensive. 2. Currently able to do typical idea of recognizable performance and the performance of mild there is a big gap. 3. At the moment the way of life and idea way of life (10w hours) there is a big distance 4. Still have some warm. 5. Light unable can be reduced. However, these drawbacks can be get over by process improvements, so even if the existing LED mild can not completely alternative the present traditional resources, but with the engineering, the future of the world must be LED pipe.
