subject: Introduction About The Cs Series Cone Crusher [print this page] CS Series Cone Crusher is the earliest cone crushers, and also the most widely used cone crushers in the world today. The improved and refined CS Series Cone Crusher owns a more reasonable structure and more advanced technical parameters. The CS Series Cone Crusher has excellent performance in manufacturing, installation, use and maintenance.
CS Series Cone Crusher Application
CS Series Cone Crusher is widely applied in cement making industry, building, sand making, metallurgical industry, etc. They are suitable for both metallic minerals and non-metallic minerals, such as iron ore, nonferrous metal ore, granite, limestone, quartzite, sandstone, pebble, etc.
CS Series Cone Crusher Working Principle
Through a horizontal axle and a pair of bevel gear, the motor of the CS Series Cone Crusher drives the eccentric sleeve to revolve. The revolution of the eccentric sleeve makes the mantle move towards to the bowl liner from time to time. In this way, the ores and rocks will be pressed and finally crushed in the CS Series Cone Crusher.
CS Series Cone Crusher Features and Benefits
1. High performance
2. High stability and reliability
3. Easy cavity dumping
4. Easy maintenance and easy operation
5. Low cost and wide application
Matters Needing Attention in Using CS Series Cone Crusher
1. Check the functioning of the cone crusher that whether there is an exception within the percussion sound. Once there will be exceptional circumstances should immediately stop working.
2. Note the pump operation, regular checks throughout the oil flow indicator, oil temperature and oil pressure indicators and so on. After the cooler the oil temperatures should not exceed 45-53, oil that will be back temperature should not exceed 60 and the department of suspension in time up to the oil.
3. Check the tightness of V-belt using the thumb pressure to measure V-belt tension. Under pressure, if not more than 1.5meter, it's ok.
4. Always check whether cone crusher beams, the frame the connection between body and machine pin is loose.
5. Check whether cone crusher liner is loose, missing and wearing.
