subject: Textile Baler Mill Size Balers - The Perfect Cardboard Waste Compactor For Large Rubbish Amounts [print this page] Legislation requires that all organizations must demonstrate they implement a good Pre-Treatment of Waste Programme. Basically, Pre-Treatment of Waste requires that you sort your waste before disposal. You should sort your waste and remove everything which can be recycled. The waste which is not recyclable can also be reduced in its volume and then sent to landfill. businesses are subject to ever-increasing taxes on volumes of waste going to landfill.
For most organizations it will not be economical to have a Mill Size Baler. The cost of a Mill Size Baler is mostly much higher than smaller waste compactors. For most businesses a small to medium compactor will be enough.
Usually, you will bale your cardboard and you can anticipate Free Bale Collections at the very least. All bales which are less than Mill Size weight (400kg/600kg) are as a rule collected Free of Charge. The collectors will take the bales to a Trade Waste Station and they will receive money for it. Mill Size bales have a higher premium price because they can be transported more economically. The mill size bales are more compact and can be loaded into containers for transport abroad to recycling plants.
If small bales are taken into a Trade Waste Station, the value is less, because the Waste Station will always re-bale the cardboard into Mill Size Bales. There is a cost for re-baling; the wire ties, the labor and the cost of the machinery. Consequently, Mill Size bales have a higher value coming into the Waste Station.
There are dedicated companies who trade in Mill Size Cardboard Bales. They will essentially come to collect your Mill Size Bales Free of Charge and they will usually pay you a rate per ton for your cargo. Typically, there is a minimum amount of Mill Size bales they will collect on each visit. This is to make transportation expenditure most economical. As a rule, they will prefer to collect 10 to 20 tons of Mill Size Bales each time. By having a complete load the vehicles will be on the road less and their Carbon Footprint will also be better.
As an example, one Cardboard Waste Trading Company, in Central England, is presently collecting 10 ton minimum cargos (20 bales) and paying between 55 to 65 per ton (Today's date is 21 February 2010). The value of Cardboard and other waste materials can rise and fall with market conditions.
I recently came across one business whose cardboard waste bill was 1,400 per month. They have recently leased a Mill Size baler from my company for 35 per week. After 5 years they will own the baler for a nominal charge. Now let's look at the financial implications:
The client was producing 14 tons of cardboard per month. The cardboard bins were costing 1,400 per month. It took many vehicles to collect this binned waste. These many vehicles transporting loose cardboard was creating a very significant carbon footprint.
The Client now has a W500 Mill Size Baler costing 151.67 per month; wire ties are about 240 per month. Total cost is 391.67 per month. The Client receives an income of 60 x 14 tons = 840. Now there is an approximate net income for cardboard waste of 448.33.
This clearly means rather than paying 1,400 for their waste, they are now receiving 448.33. They are 1,848.33 per month better off and the Carbon Footprint of this waste material is significantly reduced with much fewer vehicles needed to transport it.
Hopefully, you can see there needs to be high volumes of cardboard waste, to make the use of a Mill Size Baler economical. Bales can be stored outside on pallets until there is a sufficient amount to transport.
Deciding on the correct Waste Baler Equipment for your business, should be left to the people in the know. It's good to receive advice from people who really know their equipment and the waste materials which you churn out. Company's frequently think they need a bigger waste baler and sometimes a smaller cheaper baler will be quite adequate.
