subject: Test And Tag In Sydney: What The Law States [print this page] The law on testing and tagging in Sydney or any other cities in Australia may differ but they all follow the same mother standard. Queensland has the most extensive law on penalties covering electrical safety but all the other cities, Sydney included, are clear that a license is needed for any kind of electrical work. Outside of Queensland, you may have to look a bit further if you plan on doing some kind of research about the regulations.
The implied definition
What is electrical work? The broad definition includes constructing, manufacturing, maintaining, installing, repairing, changing or testing and tagging Sydney. If you are going the DIY route, you are constrained to changing light bulbs. If the work of the unlicensed electrician is blamed for the fire, he can face imprisonment and penalties. These punishments amplify if the fire claims a casualty or injury. The employermeaning youcan also be held liable in case of multiple deaths or injuries even if you unwittingly hired an electrical contractor with no authority to practice. Unless you could prove that you were also duped into hiring through falsified documents.
Recouping your investment
This is not only about safety issues. Insurance companies may ask for the official report of test and tag Mackay or Sydney to make sure that you complied with the government regulatory requirements especially if the fire is found to have been caused by faulty wiring. If you cant produce anything, the insurance can refuse to pay your claim because you failed to do your responsibility to make sure the workplace, or your home as the case may be, is a safe environment for your workers. If you reside somewhere in Queensland, you may have to defer with DIY techniques as this is regarded as unlicensed electrical work which could earn you a penalty of up to $40,000.
Testing and tagging your equipment
The electrical contractor is mandated to install electrical wiring to supply electricity throughout the whole building from the main switchboard. However, you are allowed to replace the fan belt of the washing machine, install garden lighting or smoke detectors powered by batteries, preparing the area to install the air-conditioning unit or any other appliances but you are prohibited from installing outlets to power them. Under the law, test and tag Sydney should also be left to professionals with the right equipment that are properly calibrated to household, office or plant circuitry. This means you stay away from off-the-shelf testing and tagging devices for DIY purposes.
