subject: Tan Testing Is A Component Of Oil Test Kits That Helps You Conserve Time And Money [print this page] TAN testing to produce the total acid number, readings of insolubles, viscosity, and the salt and water base number can be accomplished with the use of oil test kits that can perform on site testing. This oil analysis can identify possible problems or indicators of failure which can cause major repair costs and expensive down time. Entry-level or stand alone test kits are attainable in a large selection from one particular company. These economical kits can be used individually or combined with other test kits to determine a base number and provide various parameters for testing.
A larger, more comprehensive test kit can encompass testing for insolubles, salt test and TAN testing. All the necessary components and equipment that is required for your oil condition monitoring program is incorporated in the multi-parameter test kit. You will be able to conduct well-informed on-site maintenance decisions and take action before critical failures happen with the use of these easy to use kits that provide fast and accurate results.
Major repair costs for your plant or equipment and a loss of revenue resulting from down time created by equipment failure can be avoided by testing of hydraulic oil for contamination, which is a preliminary indicator of potential problems. Oil testing can determine viscosity changes as well as insoluble testing for detection including loading and residual dispersant availability with base number determination to use in comparative testing for trending. Tests that are entry-level and easy can suggest a go or no go status through comparison. TAN testing or total acid number testing is now referred to as an ECON AN, which can report hydraulic and gear oils quantitative results as another type of test that is available.
Water contamination can be determined through testing to learn if it is salt water or fresh water, which is a fact that is important for your preventative maintenance direction. Visual patch tests for hydraulic oil contamination may indicate wear metals, fibers, silica and dust in addition to water contamination. A comparison of calibrated charts with qualitative results can help advise any preventive action that may be necessary through the on-site analysis.
Preventative maintenance is important to exert as part of pro-activity to protect your equipment and extend the lifespan while improving productivity and performance. As part of your condition monitoring program you should invest in oil test kits that are available in a wide range of choices to help you perform stand alone or combination tests on site as part of your condition monitoring program to protect your investment and reduce potential downtime.
