subject: The Working Principle Of Gyratory Crusher [print this page] The working principle of gyratory crusher
There are many different types of stone crusher, stone crushing production line are often used, complete production line and mineral sand production line stone, stone crushing production. After the development process above Duiyu breaker presentation, the current breaker Heavy machinery industry has developed into a relatively large branch of industry, the benefits of working the heavy machinery crusher applications for the current situation and the stone industry in a variety of different quality characteristics, according to different Application of sums up the current industry crusher several major categories, including jaw crusher and so on.Gyrating crusher is used in the shell cavity of the cycle within the cone movement of materials generated extrusion, splitting and bending and hardness of coarse broken all kinds of large-scale ore or rock crushing machinery. Broken cone axis with the upper bearing bush in the middle of the beam, the lower end of the eccentric sleeve is placed in the hole. Sleeve rotates around the broken cone axis for eccentric cycle exercise machine of its crushing action is continuous, and therefore the efficiency of higher than jaw crusher. To the early 70s, large gyratory crusher has been able to handle material per hour, 5,000 tons, the largest feeding up to 2,000 mm diameter.
Gyratory Crusher has two ways to achieve nesting population adjustment and overload insurance: the first is using mechanical means, the spindle nut to adjust the top, rotate adjusting nut, cone can be broken down or up, so I followed changes nesting bigger or smaller, overloaded, by cutting off the pin on the drive pulley to achieve insurance; The second way is to use hydraulic breakers hydraulic cycle, the spindle is located in the hydraulic cylinder of the plunger, the change under the plunger hydraulic oil can change the volume up and down the cone crusher location, thus changing the nesting population size. Overload, the spindle downward pressure to force the plunger into the hydraulic oil under the accumulator in the hydraulic system so broken down cone to increase the nesting along the mouth of material discharged into the crushing chamber with a non-broken materials (iron, wood, etc.) in order to achieve security.
It integrates three crushing methods into one. All of these made it the core equipment in sand making industries. It is widely used in a variety of metals and non-metallic minerals, cement, refractories, abrasives, glass raw materials, construction aggregate, sand, metallurgical and other industries. Applicable for medium and fine crushing of various ores and rocks, such as iron ore, non-ferrous metal ore, corundum, bauxite, quartz sand, corundum, perlite, basalt materials
