subject: Spring Cone Crusher Is More Advanced And Efficiency [print this page] Spring cone crusher is more advanced and efficiency
Spring Cone Crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compared with Jaw Crusher, PY Series Spring Cone Crusher is of stable structure, high efficiency, easy adjustment, and economical using etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the Cone Crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. This type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
PY Series Spring Cone Crushercrushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency than Jaw Crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined.
Application of the Spring cone crusher
The spring cone crusher can widely be applied to crush the hard and mid-hard ores and rocks in the field of metallurgy , building, road , chemicals ,and construction industrials and so on. And spring cone crusher can also be used to crush the Iron ore, limestone, quartz, granite, cement guessed, and so on.
Working principle of Spring cone crusher
The main structure of spring cone crusher is including the frame, transmitting, hollow eccentric shaft, bowl bear, crushing cone, set adjustment , adjustment housing ,spring and hydraulic drill used to adjust the discharge opening ,etc. .During the operation of spring cone crusher , the motor drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is closely to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and finally crushed.
The spring cone crusher is the most widely crushing machinery in the world . With the optimized improvement , the spring cone crusher features more reasonable and advanced ,which have appeared the excellent performance in the manufacturing ,installation, and maintenance and so on. And with the simple operation, safety, and high-efficiency, the spring cone crusher we company produced have been specially used in the mining and crushing working. And we look forward to your consultation !
We provide Professional technology, excellent product quality and intimate after-sales service when you purchase Magnetic separator, Ball mills, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.
