Board logo

subject: Why The Jaw Crusher Yield Can Not Reach Standard [print this page]


As we all know, jaw crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPA. Our design and production are of high position both at home and abroad.

Why jaw crusher yield could not reach the standard sometimes? To this, the relevant personage from Hongxing Company points out that the standards of jaw crusher production are very strict. Sometimes, the products can reach some production standards, but can not reach other standards, and the reason has various aspects. The main reasons are as follows.

1. Material hardness or toughness beyond instructions prescribed scope;

2. Motor connection position against, moving jaw clockwise spin, or motor triangle meet method into star;

3. Discharging mouth smaller than the specified limit;

4. Jaw plate shift, tooth crest and tooth crest relative;

5. Voltage is too low;

6. The clearance between moving jaw and bearing become large after wearing, and bearing outer ring rotate relatively ;

After understand the reason, the solution is very simple and clear.

Elimination methods:

1. Change or add crusher;

2. Exchange motor connection;

3. Discharging mouth adjust to manual nominal discharging prescribed mouth and increase the crusher for finely crush;

4. Check the sizes from gear plate to tooth, jaw plate are must be replaced if it doesnt conform to the standards. Reset the relative position of fixed jaw and moving jaw to prevent shifting;

5. Raise the work site voltage to adapt host overloaded requirements;

6. Replace bearing or move the jaw.

Hongxingstaff says, it must be consulting professionals when it appears jaw crusher yield not reach to substandard. Solving problems after determine them, don't looking for the root of the problem blindly.

Henan Hongxing Mining Machinery Co., Ltd. is one of the most famous jaw crusher manufacturers and suppliers in China. If you want to get more information about the jaw crusher yield, please contact Hongxing Company.

Rock crushing plant : http://www.ore-machine.com/stone-line.html

sand maker : http://www.hxjqcrusher.com/Sand-maker.html

by: jocelyn




welcome to loan (http://www.yloan.com/) Powered by Discuz! 5.5.0