subject: Main Factors Affect The Development Of Sand [print this page] With the development of domestic economy, people have tighter requirements on sand products. Henan Hongxing Mining Machinery Co., Ltd. will help you analyze main factors that will affect the development of sand:
1. Hardness of the material
The harder the material is, the more difficult for sand crushing. In addition, hard materials will cause more serious wear and tear on the machine.
2. Fineness of sand material
Fineness requirements refer to the specific size of sand materials. It depends on customers' needs for the finished products, if there is no special requirement, and the general fineness of the material is based on the fixed system.
3. Composition of the materials
Before the machine starts, operators should check whether the material contains powder. As powder is easy to adhere when the crushing process begins, operators should sieve the material in advance.
4. Humidity of materials
If material contains water, it is likely that the water will be transported during the crushing process, leading to the losses of sand materials. The solution to solve the problem is to ensure that all materials selected is necessary to strictly control the temperature of the material, if the temperature of the selected material is too large, dried or sunshine can be used to reduce the percentage of moisture in materials.
The above is a summary of factors that will affect sand development, only if we understand the nature of the problem can we be able to make our sand making machine to the limit.
And sand maker is the key equipment in the development of sand. Sand maker is suitable for the crushing and reshaping of soft materials or medium hard and extremely hard materials. It can be widely used in the crushing of various ores, cement, refractories, bauxite clinker, carborundum, glass raw materials, mechanic stone materials and metal slag, and it is of particularly higher efficacy and productivity in the crushing of dead-hard, extra-hard and corrosion-resistant materials, such as silicon carbide, carborundum, sintered bauxite, magnesia and so on.
