subject: W500 Baler - The Ideal Plastic Waste Compactor For Considerable Waste {volumes [print this page] Legislation requires that all organizations must demonstrate they implement a good Pre-Treatment of Waste Programme. Basically, Pre-Treatment of Waste requires that you sort your waste before disposal. You should sort your waste and remove everything which can be recycled. The waste which is not recyclable can also be reduced in its volume and then sent to landfill. company's are subject to ever-increasing taxes on volumes of waste going to landfill.
For most businesses it will not be economical to have a Mill Size Baler. The expenditure of a Mill Size Baler is typically much higher than smaller compactors. For most company's a small to medium waste baler will be adequate.
Normally, you will compact your cardboard and you can anticipate Complimentary Bale Collections at the very least. All bales which are less than Mill Size weight (400kg/600kg) are usually collected Free of Charge. The collectors will take the bales to a Trade Waste Station and they will receive money for it. Mill Size bales have a higher premium price because they can be transported more economically. The mill size bales are more compact and can be loaded into containers for transport abroad to recycling plants.
If small bales are taken into a Trade Waste Station, the value is less, because the Waste Station will always re-bale the cardboard into Mill Size Bales. There is a cost for re-baling; the wire ties, the labor and the cost of the machinery. Consequently, Mill Size bales have a higher value coming into the Waste Station.
There are specialist companies who trade in Mill Size Cardboard Bales. They will actually come to collect your Mill Size Bales Free of Charge and they will generally pay you a price per ton for your cargo. In general, there is a minimum quantity of Mill Size bales they will collect on each visit. This is to make transportation costs most economical. Mostly, they will prefer to collect 10 to 20 tons of Mill Size Bales each time. By having a complete load the vehicles will be on the road less and their Carbon Footprint will also be better.
As an example, one Cardboard Waste Trading Company, in Central England, is presently collecting 10 ton minimum cargos (20 bales) and paying between 55 to 65 per ton (Today's date is 21 February 2010). The price of Cardboard and other waste materials can rise and fall with market conditions.
I recently came across one business whose cardboard waste bill was 1,400 per month. They have recently leased a Mill Size baler from my company for 39 per week. After 5 years they will own the baler for a nominal payment. Now let's look at the financial implications:
The customer was generating 14 tons of cardboard per month. The cardboard bins were costing 1,400 per month. It took many lorries to collect this binned waste. These many lorries ferrying loose cardboard was creating a very big carbon footprint.
The Customer now has a W500 Mill Size Baler costing 173.33 per month; wire ties are about 240 per month. Total cost is 413.00 per month. The Customer receives a revenue of 60 x 14 tons = 840. Now there is an approximate net income for cardboard waste of 427.00.
This clearly means rather than paying 1,400 for their waste, they are now getting 427.00. They are 1,848.33 per month better off and the Carbon Footprint of this waste material is greatly reduced with much fewer vehicles needed to transport it.
Hopefully, you can see there needs to be high volumes of cardboard waste, to make the use of a Mill Size Baler economical. Bales can be stored outside on pallets until there is enough to transport.
Deciding on the best Compactor Equipment for your business, should be left to the people in the know. It's best to get advice from people who really know their machinery and the waste materials which you churn out. Businesses often imagine they need a larger baler and sometimes a smaller less-expensive waste compactor will be quite enough.
