subject: The Structure And Operation Of Mixer [print this page] The mixer is also called chute, which can make medicine and mash mix even enough .The mixer has advantages of simple and convenient operation, high efficiency, the material to be mixed more evenly, less time of mixing. The impeller and stator of the mixer are easy to wear parts. The impeller is made of high hard wear-resisting material, which is long service life, low failure rate, long replacement cycle, and reliable operation, and which can be connected with flotation machine to form production line and reduce production process, and improve comprehensive benefits. This machine rotates by the V-belt drives the impeller, make medicine and mash mix even enough, increase the medicine effect time, strength the medicine effect quality. It fits minerals and every chemical industry mixing. Mineral chute is suitable for different kinds of metals, and it is mainly used for mixing before flotation and makes the medicine and mash mix even enough. It applied in concentration less than 30% and the fixed concentration is less than 1mm. Some Notes in Operating Mixer: To a service-oriented brand integrity,As the professional manufacturer of complete sets of mining machinery, like vibrating feeder, Henan Hongxing is always doing the best in products and service.vsi sand maker:http://www.hx-china.com/8.html1. The mixer shall set up in the position of the flat, supporting the axles by square wood, raising tires, which can ensure operate normally. 2. The mixer should be a secondary-level leakage protection. When connected to power, the operator must check carefully and operate by empty machine and then use it. In test running, we must ensure the rotating speed of the mixer. In general, the empty machine is much faster 2-3turns than heavy machine, if the turns have a great deal difference, the driving wheel should be adjusted.3. The rotating direction of the mixer is in accordance with the sign of the machine, if not, the wiring of the motor should be changed.4. Checking whether the clutch and brake are flexible, the wirerope is good, and the pulley is normal and the lubrication of all parts.5. When the machine is in use, the operator should pay attention to the different parts of the mixer .when turning off the machine, check whether the impellor is crooked and the screw is loose 6. After work or stop when not in use, disconnect the plug blackouts and lock switch box to ensure safety.
