subject: Matters Needing Attention In Using Jaw Crusher [print this page] The description of jaw crusher: The description of jaw crusher:
It appeared earlier broken equipment, because of its simple structure, robust, reliable, easy maintenance and repair and production and construction costs less, therefore, until now still widely available in the roads and bridges, metallurgical, chemical, building materials, electricity, transportation and other industrial sectors, for the crushing compressive strength at 147 ~ 245MPa of various minerals and rocks of coarse, medium, small and fragmented. In recent years, our factory to meet the metallurgical, mining, construction and other industrial sectors broken high strength, high hardness of low carbon ferrochrome needs, specially developed strong jaw crusher.
The features of jaw crusher:
Model, stable performance, crushing ratio, uniform crushing particle size, simple structure, reliable operation, easy maintenance, low operating costs, the crushing chamber depth, and with no dead zone, increase the feed capacity and output, adjust the range of discharge opening to meet the requirements of different users, using a fluid coupling, improve equipment performance.
Jaw crusher is the common equipment for crushing stone materials. However, if operators do not have enough preparation before the machine starting, there will be serious influence on the working life of the machine. The mistakes will damage the machine during operation process and cause a major overhaul or re-purchase of machinery, which is undoubtedly a great loss for the enterprise. Actually, the risk of machine failure can be reduced to a certain extent by doing the following steps of the preparation work before it starting.
Make sure that each part has been checked before jaw crusher starting, Operators should clean the foreign body in the jaw crusher crushing chamber, including the left material in the cavity, a variety of production wire, tools, iron, etc.If there are any, they must be taken out immediately. The material inside will overload and burn out the motor or damage the static jaw plate parts and movable jaw plate. Before you start the machine, you should check the security measures of jaw crusher just in case.
Before the jaw crusher starting, operators will check the machine bearings and lubrication conditions of other lubricated place. Only good lubrication of the machine can maximize production. People should take any measures to ensure the production run smoothly:
