subject: How To Make Ball Mill Work More Efficiently [print this page] The ball mill is mainly composed by the rotating part, the main bearing, the charging device, the discharging installment, the transmission device and so on.
Nowadays, more and more people regard ball mills as an efficient tool, why? What can ball mill do? Ball mill is an efficient tool for ball mill grinding many materials into fine powder. The Ball Mill grinder is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine. To use the Ball Mill grinding, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
It should be noted that the mill drive layouts can not change randomly, you must ensure that the pinion gear of Ball Mill Grinder on the role of forever upward, if the ball mill shift changes, then there is the direction of mill rotation part of the spare parts should be changed accordingly, such as the young striper plate, ladder liner, spiral tube and so on.
Another question we should pay attention to is that the ball starts the motor with a reducer, the occurrence of vibration, mainly due to:
(1) Two rounds of ball coupling gap is too small, can not compensate for the motor at startup, from self-inflicted caused by the magnetic center of run out.
(2) Coupling the alignment ball the wrong way, resulting in two-axis misalignment.
(3) No ball coupling bolts tightening relative said, and not the same degree of tightening force.
(4) The ball bearing outer ring activities. Treatment: According to the provisions of the gap on the round a good tune, so that the two concentric shafts. Symmetrical with equal torque coupling bolts tightened. Rotor imbalance, it will be to find out ball rotor static balance.
