subject: The Analysis About The Structure Of Ball Mill [print this page] The ball mill is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control) and so on.
The hollow axis adopts the cast steel and the lining can replace, the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scaleboard. This machine run steadily and works reliably.
The Ball Mill is mainly composed by the rotating part, the main bearing, the charging device, the discharging installment, the transmission device and so on.
The Ball milling machine runs along the outside gear. Materials spirally and evenly enter the first warehouse along the input hollow axis by input devices. In the warehouse, there is a ladder scale board or ripple scale board. Steel balls of different specifications are installed in the scale board of the Ball milling machine. When the barrel body rotates, centrifugal force is produced. At the same time, the steel balls are carried to some height and then fall to grind and strike the material. After being grinded coarsely in the first warehouse, the material then enters into the second warehouse of the Ball milling machine for regrinding. In the end, the powder produced by the Ball milling machine is discharged by output material board.
Ball mill grinder is the most robust design in the industry. Fuller-traylor mill is the most robust Ball Mill Design in the industry with installations through 27' in diameter. These heavy-duty Ball Mills feature hydrostatic lubrication with either gear or gearless drive arrangements. Fuller-traylor ball mills have been manufactured in both trunnion and shell-supported arrangements. We also offer a more cost effective mill line called the ft series mills.
The series of ball mill has made a great improvement in the structure compared to the traditional ones. Its cylinder and supporting frame compose an integral system, thus, when it is being fixed, it will be hung on the foundation once. Equipped with double-tiered centripetal roller bearing, its power consumption will be reduced by 30%. The intrinsic grill pattern forcing discharge is replaced by overall pattern controlling discharge, which enhances the fineness of final product, and meanwhile increases the capacity by 15-20%. The matched motor power can reduce 18-25%, saving lubricating oil 70% and cooling water 90%. Anyway, it can save energy more than 20%.
