subject: What Makes The Mvp Cone Crusher Superior [print this page] As early as the mid-1980s, China's Hubei Dayukou phosphate mine had been introduced with Rollercone rolling hydraulic cone crusher for the crushing operation with favorable results, convenient discharging adjustment and reliable overload protection. In recent years, Qinghai Saishitang copper mine selects U.S. Cedarapids group Automaxl000 type rolling bearing cone crusher, which adopts rolling bearings support and surrounding multi-cylinder hydraulic lock structure, with high production capacity, large crushing ratio and fine product size; it can break ore from 160 mm to 12 mm and 1 equipment can achieve two sections effect of other equipments.
The MVP cone crusher adopts the rolling bearing to support itself, using the foregoing eccentric structure to drive the crushing cone. While the crusher employs a laying-type installation, the balancing mass is located at the bottom of the dynamic cone. The prominent features are: main shaft of the dynamic cone is able to bear greater crushing power, the cone body is easy to extract, and it is convenient to change the quick-wear partthe dynamic cone liner, which improves the working environment of the lubrication system as well as promotes the reliability. Compared with these traditional ones, theres a fundamental change from the MVP cone crusher that it adopts crossing axis rotation, and it has surmounted the problem that the stroke of the feed port of traditional cone crushers is short, ensuring both a sufficient compression stroke for the materials after entering the crushing chamber and uniform distribution of the materials. Therefore, enough crushing force as well as better crushing effect can be obtained.
MVP-type cone crusher structure is significantly different from traditional cone crusher. The biggest difference is: MVP-type use rolling bearings instead of the traditional sleeve and sphere tile. The clearance between rolling bearings is much smaller than that of sliding bearing, so crushing machine can run smoothly; and set point in the discharging is more precise, so that the crusher can precisely and stably work in the proven discharge opening and reduce the impact of crusher on the body and other parts, significantly improve the status of the force, improve the reliability and security of the machine.
The MVP cone crusher adopts the rolling bearing to support itself, using the foregoing eccentric structure to drive the crushing cone. While the crusher employs a laying-type installation, the balancing mass is located at the bottom of the dynamic cone. The prominent features are: main shaft of the dynamic cone is able to bear greater crushing power, the cone body is easy to extract, and it is convenient to change the quick-wear partthe dynamic cone liner, which improves the working environment of the lubrication system as well as promotes the reliability. Compared with these traditional ones, theres a fundamental change from the MVP cone crusher that it adopts crossing axis rotation, and it has surmounted the problem that the stroke of the feed port of traditional cone crushers is short, ensuring both a sufficient compression stroke for the materials after entering the crushing chamber and uniform distribution of the materials. Therefore, enough crushing force as well as better crushing effect can be obtained.
Through changing the static cone liner and the dynamic cone liner, the MVP cone crusher can get extra coarse, coarse, medium-fine, fine and ultrafine chamber to meet the demand of various customers and provide great convenience for them. The customers can adopt one model to decrease the accessories amount. The cone crusher is a relatively ideal crusher, for it is able to perform a standard secondary crushing work as well as the fine and superfine crushing work.
MVP-type cone crusher completely overcomes the traditional shortages, and improves work efficiency of the machine.
