subject: How To Install A Satellite Radio To Your Vehicle [print this page] Satellite radios were produced to give a fun entertainment while driving at the comfort of your own car. In the United States, a lot of drivers tune in to their favorite music or sports channel while driving. This device helps in breaking silence or provides enjoyment especially if you're driving a very long road.
When you decide to install a radio unit in your vehicle, make sure to have the latest and greatest satellite tuner. Installing a satellite radio gives you the option to either pay someone to install it or do it by yourself. For cheaper result, try to install it with your own hands. Don't worry, this page will help you how to install a satellite radio.
1. Install the antenna.
The antenna of a satellite radio is the most difficult component to install in a vehicle. Choose a specific area of your vehicle from the inside or the outside. Make sure the location of the antenna will have a clear view of the sky so reception will properly work. Most antennas are mounted on the front of the roof just near the edge of the windshield. After selecting the best location, find where the wire should run. You may run the wire from the outside by using the rubber seals and under the dashboard of your vehicle.
2. Mount the satellite radio.
When the antenna and wire are set, next to install is the satellite radio unit. Find a spot where to mount the radio. One of the options you use is a rubber suction device that will be placed on the windshield. You can also switch to a fabric fastener if you need a more secured mount. Through a fabric fastener, attach the bracket to the dashboard, windshield or other location you have chosen. Then, install the satellite radio receiver on the receiver mount you have placed.
3. Connect the audio.
After the antenna, wire and radio unit are installed, you only need to connect the audio to the stereo. Use the input of the stereo, which is the best type of connection. Connect one end of the connector wire or cable to the headphone output of the satellite radio unit and another one to the stereo's input. In case your stereo doesn't have any input, you can use an FM transmitter. However, most satellite radios have a built-in FM transmitter included. This transmitter will help you find any unused radio station in order to receive signal from the satellite radio.
All satellite radios need antennas in order to produce music or other channels. What's good about satellite receivers is that they use wireless technology. This means you can listen to your vehicle radio without connecting a wire to the receiver. But if you opt to choose otherwise, you may have high-end single or double speakers. You only need to run one more wire from the back of your receiver cradle to your stereo. Sometimes, you need the help of an expert here, so it's better to ask some inquiries.
