subject: Modern Techniques Applied In The Vibrating Screen [print this page] Linear vibrating screen is one kind of new and high efficient universal screening equipment, and the trajectory of its screening box is approximately a straight line. The linear vibrating screen has features of simple structure, high screening capacity, energy consumption and easy maintenance. Linear vibrating screen is widely used for the classification of large block materials and medium and small granular materials in the fields of mining, coal, electricity, metallurgy, building materials and refractory materials and so on. The vibrating equipment is used to separate the stuff. It is composed of main frame, screen web, electric motor, eccentric bock, rubber spring, coupler and so on .We will offer suitable type according to your requirements.
The fourth generation SC vibrating screen which uses modern engineering techniques as much as possible is improved on the base of SL vibrating screen. It processes sheet metal parts by using laser and water cutting method. The hollow section instead of solid section in the structure has ensured the stability of structure. Fold rather than weld in the flange has reduced the workload and avoid stress concentration. The new design has a large discharging size and new type dustproof device from users needs. It also has electric heating, pneumatic cleaning and electric devices.
Linear vibrating screen is new screening equipment with elliptical vibration track. It adopts cylinder-type structure, eccentric shaft vibration exciter and eccentric block to adjust amplitude; the advanced rivet connection assembly rack structure improves the service life of equipment, spring vibration reduction device reduces the impact on the foundation, so it can be called a multi-layered and highly effective new shaker. Linear vibrating screen is of strong vibration force, large amplitude, high screening efficiency and big productivity, can be used for screening rough material. Linear vibrating screen has novel structure, advanced technical parameters, large capacity, high screening efficiency and simple maintenance; spring steel mesh or punching sieve prolongs service life and reduces pore plugging.
Curved vibrating screen is a type of wet fine screening equipment. According to the feeding methods, it can be divided into pressure feeding type and gravity feeding type. The main part of curved screen is the sieve with a curved screen surface. Part of pulp flow through the sieve under the centrifugal force. Some uncut pulps flow above the sieve under the force of inertia.
The effective width of single-axis vibrating screen produced by Germany SIEB TECHNIK is 2400mm abroad, and the length is up to 6000mm; the effective width of biaxial screen is 5500mm, the length is up to 11000mm; amplitude: the single-axis screen is about 12mm, and the biaxial screen is 16mm; the conveying speed of material is generally 0.3-0.4 m/s, even higher than this rate.
