subject: How To Replace Wearing Parts Of Impact Crusher [print this page] How to replace wearing parts of impact crusher
How to replace the wearing parts of the impact crusher? When you replace the wearing parts of the impact crusher, you should first open shelves. When you begin to use the machine, you should first remove the coupling bolts of the rear rack and the cabinet, and then use the wrench to wrest to the hex head portion of the clamshell device, and then the shelves slowly open. In the meantime, you can use the rack above to hang the rear rack. Repeat the above process and the close the shelves. When the hammer of the impact crusher wears to a certain extent, you should timely adjust or replace it in order to avoid the damage of fasteners and other parts.
Firstly, before using a jaw crusher, the operator must check if there is foreign body in the crushing chamber. If there is, it must be timely cleaned out before starting the machine, otherwise, the too large startup load would damage the machine.
Secondly, the jaw crusher is afraid of uneven feeding the most, especially when the feedstock suddenly increases, the consequently too large load will burn out the motor. Even if not that serious, the long-term high-load operation will increase the wear and tear of the machine and reduce its service life.
Third, enhance the capability of independent innovation. In recent years, it is more and more difficult to absorb in advanced technology from abroad, so we should make every effort to promote independent innovation system.
Fourth, play the role of technical standards to market access. New technologies and new product in machinery industry develop fast in recent years, while the lag of standard operation set a limit to improve the competitiveness. Therefore, we should guide enterprises to accelerate technological progress to advanced chain through the establishment and implementation of new standards to electric motor energy efficiency.
Hongxing Machinery Co., Ltd. has been engaged in the development and production of the crusher for many years; relying on rich production experience, we introduce a series of crusher equipment such as jaw crusher, impact crusher,hammer crusher,grinding equipment and complete sets of production lines, which popular in the power plants, building materials, grinding industry and other fields by dint of its novel structure, low energy consumption, high efficiency and environmental protection advantages.
