subject: How To Change Your Front Door Lock [print this page] It happens to best of usIt happens to best of us. Running around late for work, still woozy from yesterday evening's slumber we jump out of bed into our office clothes and running out the door.
Stepping some steps forward we attempt to grab the keys to the vehicle. Our search for the keys leads to a frenzied try to empty out our bags, pocket and just about anything we will be able to keep the keys in. Sadly , the search all becomes futile when we finally realize that we left the keys in the kitchen counter.
A fast look into the window attests those fears as we see the keys are precisely where you left them. At that point, we would get a neighbour to help us open our door with the help of some power tools. We have asked a Melbourne Locksmith about the usual mistakes that folk do when they try and open a by mistake locked door and they are saying that it's the acute force applied to the door breaking.
When you intend to replace a door lock, go ahead and call a Melbourne Locksmith and they can fix it the correct way. Most would just employ a sledge hammer to open that door. the final result is that you get back into your home but with it you finish up with a damaged door. This leaves you with no other recourse but to replace the old busted front door with a newer one.
When selecting a new door lock, the very first thing you may do not forget to do is select one with the same brand. Doing so will eliminate having to cut out new notches or drilling new holes to your door. Simply make sure not to break the door too much when you're causing it open. It also helps if you can bring the old door lock with you when you purchase a new lock for your door. To get rid of the lock, the very first thing you want to do is open your door, giving you access to all of its screws. Take away the screws holding the door knob to the door lock.
You can typically be seen in the side of the door which is found within your place. Sometimes these screws are all that you need to take the door knob off but if the door knob doesn't slide off simply then look for a little button just behind the base of the shaft holding on to the knob. Push on the button employing a flat head screw driver and the knob and the shaft holding it should just pop off.
You should be left now with the door knobs face plate. Simply slide in your screw driver in and pop off the face plate. Now, you should be left with your door's striker holding on to the latch of your door. On the fringe of your door, remove the 2 screws holding the latch prepared. After you remove the screws, the latch can be removed simply by pulling out the latching mechanism. Bring the disassembled doorhandle with you to the ironmongery shop. Now you have your new door knob set, you ought to have 2 door knobs, a latch set, 2 long screws and 4 short screws.
Start by attaching the latch to your door. Ensure that the latch is facing the right way ensuring the pointed side will come in touch with the catch attached to the door jamb. Adjust the latch to be sure that mechanism attaching to the door knob is at the centre of the hole where you'll attach your door knobs to.
Once you are OK with the way your latch is placed, join it permanently to the door by screwing into place. Then, attach the door knobs to the door. Ensure that the locking button is inside the house and the door knob with the key hole is facing the front of your place. Also, ensure that the keyholes are aligned correctly. Once you are OK with the position of your door knob, attach them with the long screws.
Jiggle the door knob to be certain it is fastened correctly. Then, close the door to make certain it closed correctly. If it doesn't meet the catch correctly, take away the door knob and adjust the latch. Always recall that if it starts to become too hard at any time go on and call a professional Melbourne Locksmith to do the job right.
