subject: Problems Of Artificial Sand During Usage [print this page] The artificial sand is collectively referred to as the mechanism of sand and mixed sand. It has been widely used, but in the using course, certain problems may arise as well.
Quality problems
There is also a natural lack in artificial sand: diverse grain shapes, large surface area and water demand. As technology advances, most of these problems have been resolved.
A grain shape: flakiness is too much, some of the problems are from rocks, but more important is the selection of equipment problems, if choosing special equipment, this problem can be solved completely.
B Grade is not entirely reasonable, and fineness is modulus. The majority of enterprises in order to reduce machine wear and tear lower production costs, production of sand fineness modulus is mostly above 3.0, while the best fineness modulus of configuration of concrete is about 2.6.
C Powder problem: mud powder on the concrete is harmful, it is necessary to strictly control its content. But the powder is beneficial to the concrete existence for appropriate amount of powder can make up for the shortcomings of poor workability of sand configuration. Today, many enterprises in the process of washing the soil also washed away a lot of powder, which destroyed the gradation of the sand.
The problem of understanding:
Gravel aggregate in the concrete is very important, playing the role of the skeleton and passing stress. The quality of the gravel has a direct impact on the development of concrete. In fact, the mechanism of sand in the particle size distribution, grain shape, surface characteristics, flakiness, particle content, porosity, etc. all have the unparalleled advantage of natural sand. However, due to their thinking and understanding, they often know less than the superiority of sand, only the mechanism of sand as a substitute for natural sand materials is treated as the mechanism to measure the sand with the standard of natural sand, thus seeing all the sand weaknesses.
So Hongxing thinks that: we should abandon the traditional concept, re-understand the function of artificial sand in the construction of concrete and really do a good job in the promotion of sand!
1High capacity, high productivity--50-500t/h, the output is 30% higher than the traditional sand maker under the same power.
2Low consumption of wearable parts--- best design of crushing chamber impact angle, little friction with the wearable parts, 30% lower running cost compared with traditional equipments, and reduced the use cost directly.
3Excellent shape of final products--- cubic products shape, good granule, reasonable grading, adjustable fineness modulus, especially suitable for artificial sand make and stone reshaping. The practice has showed that the effect of this series sand maker can improve 30% output in the process of sand making and stone reshaping than the traditional equipment.
4Easy installation and maintenance --- light weight, various installation ways, movable installation; The installation, repair and maintenance are easy, the operation is convenient. Once it is used for specific application, VSI sand maker only need to be adjusted very little, then its can reach the maximum performance.
5The sand maker can serve as several purposes, and applied flexible---- the special feeding crush structure, which with many crush chambers, and easy to realize the transform of stone hit stone, stone hit iron, solved the problem of one machine serves as several purposes. If you want to change the application of VSI sand maker, you neednt to make much adjustment, and then this machine will meet your demands.
Stone crusher plant : http://www.hxjqcrusher.com/crusher/Hammer-crusher.html
