subject: Raymond Mill Ring,quincunx Stand And Central Shaft [print this page] Raymond Mill Ring OverviewThe grinding roll presses the mill ring under the function of RCC tightly, so even if they were grinded to a certain extent, it wouldn't influence the amount and fineness of finished products. The raymond mill roll and theraymond mill ringboth have a long replacement cycle, thus the drawback of centrifugal mill is eliminated. The winnower air operates round winnower machine, mill shell-cyclone separator. So compared with high-speed centrifugal crusher, raymond mill has less dust and workshops are much cleaner.Working PrincipleWhen it is put into use, the materials to be grinded are put into the main frame through the feed-in bin on the side cover. Then it revolves round the vertical axis line by the milling roller hung on the star rack. With the centrifugal force by rotation, milling roller wings outside and presses fast on raymond mill ring to make relieving tool carry materials between milling roller and ring, thus the materials are crushed by the rolling and milling of the milling roller.Features And Benefits1. Reliability, safety.2. Low energy consumption, low noise.3. Easy maintenance and adjustment.4. Excellent performance, long service life.5. Reasonable structure.6. Convenient for transport.Raymond Mill Quincunx Stand OverviewThe mainframe drives the central axis through the speed reducer in the mill. Theraymond mill quincunx standconnected with the upper part of central axis, at the quincunx stand, rollers are set and by which the vibrating pivot formed. Below the quincunx stand and rollers there is shovel system. Materials are fed into the space between rollers and shovels when they are turning, and then be grinded by the pressure produced when rollers are turning, thus powder is made.Working PrincipleThe main unit runs with a central shaft driven by a transmission device. The top of the shaft is connected with the raymond mill quincunx stand, on which a grinding roller is installed to form a swing support, the grinding roller not only rotates around its own axis, it also rotates around the grinding ring and rotates itself due to the friction. There is spade system under the raymond mill quincunx stand, which is at eh bottom end of the grinding roller. During rotation of the spade and the rollers, materials will be fed into the space between rollers and ring to form a material layer. The materials will be grinded due to centrifugal force.Features And Benefits1. Reliability, safety.2. Low energy consumption, low noise.3. Easy maintenance and adjustment.4. Excellent performance, long service life.Raymond Mill Central Shaft OverviewThe raymond mill main unit runs with the araymond mill central shaftdriven by a transmission device. The top of the shaft is connected quincunx stand, on which a grinding roller is installed to form a awing support, the grinding roller not only rotates around its own axis, it also rotates around the grinding ring and rotates itself due to the friction.Working PrincipleThe grinding process of the main mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the quincunx stand, on the frame is loaded with the roller assembly, and forms a swinging pivot. The raymond mill central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect.Features And Benefits1. Reliability, safety.2. Low energy consumption, low noise.3. Easy maintenance and adjustment.4. Excellent performance, long service life.
