subject: Tips To Energy-saving For Your Pool Pumps [print this page] The Pool Pump is considered essential for pool operation as it provides the circulation needed to keep the water sanitized and filtered. With regular increasing energy costs, however, methods to reduce pump operating costs are essential more than ever. Here are a few energy-saving tips that helps you enjoy your pool without worrying about your next electric bill.
1. Choose to Understand the turnover rate:
For a swimming pool, the turnover rate is the amount of time taken to circulate the entire volume
of water through the system once in order to meet reasonably clean and safe water standards.
A pump must run long enough at the required flow(s) to complete the minimum number of turnovers. (Check with the local regulations for the minimum required turnover rate in your area.) In many cases, pumps may be running for a longer time than required, consuming additional energy that increases your electric bill. Consult with your local pool professional to understand the turnover rates better and how they might influence the operation of your pump. With pool usage, temperatures, and sun exposure all increase during the summer, and you may need to lengthen your pump" s running time to keep the water properly circulated. Based on your specific needs, Your pool professional may be able to assist you in automating system settings or modifying your time clock.
2. Choose to Consider running your pump at off-peak times:
Consult your utility provider to determine if it charges different rates depending on the time of the day, referred to as " Time of Use" rates, which may be financial incentives to run your pumps at the " off-peak" times. Taking into consideration, the turnover requirements for proper sanitization as noted, you may be able to considerably reduce the amount of time you require to run your pumps during peak electric demand and thereby, save money over the course of the pool season.
3. Choose to Use a multi-speed pump:
A multi-speed pump, provides the greatest opportunity for energy savings. Pumps running at lower speeds use significantly less power than the traditional single-speed pumps, and therefore, dramatically reduces energy consumption. You can save more money running a pump at lower speeds for a longer period of time than if you will be running a single-speed pump for a shorter period of time. Also, Keep in mind that your pool water will also be cleaner and less susceptible to algae as the water is being circulated more often.
Two-speed pumps, which operate at two fixed speeds, require a separate automation system to adjust between speeds and It is found to save as much as 70 percent on energy costs. A variable-speed pump, which can operate at a wide range of speeds" "including those even lower than two-speed models" "can save as much as 90 percent on energy costs compared to the typical single-speed pumps.
Some variable-speed pumps include integrated timers to adjust the speed automatically for the performing task; this means you" ll barely have to adjust the settings yourself and won" t need to buy any additional pieces of equipment.
While the actual savings varies based on a comparison pump model, electrical rate, and other hydraulic factors (i.e. plumbing size), the savings can be quite significant. We also see that, many pool pump manufacturers have energy-saving calculators on their websites to help you realize how much money you can save every season using a two-speed or variable-speed pumps.
