subject: Important Information About Vibrating Feeder [print this page] As crushing equipment with low noise, low power consumption and excellent regulation performance, the vibrating feeder plays an irreplaceable role in the dressing production line. Hongxing vibrating feeder is a liner vibrating feeder with obvious advantages, such as simple structure, reliable operation, smooth vibration, light weight, small in size, easy in adjustment and installation, convenience in maintenance and long service life. Whats more, it can prevent the dust pollution when applying the closed-structure main body. In a word, Hongxing vibrating feeder has a good comprehensive performance.
The Maintenance Requirements of Vibrating Feeder
1. It is better to check the amplitude, current of vibration motor and surface temperature of the electrical machine regularly in the operation process of vibrating feeder. It demands that the amplitude should be even and not sway no matter at the beginning or in the end. And the current of vibration motor should be stable. If the machine is in the case of abnormal condition, it is better to stop the processing of machine immediately.
2. The lubrication of the vibration motor bearing is the key to the normal operation of the whole vibrating feeder. In the use process, it is better to put the lubricating grease into the bear termly. Usually, the grease should be put every two months. But in the high temperature season, the grease should be put every month. And the electrical machine should be overhauled semiannually, at the same time, change the internal bear.
The Lubrication Requirements of Vibrating Feeder
1. The vibrating feeder uses the thin lubricating grease to do the lubrication. The lubricating grease should be chosen according to the use place and the use temperature. Usually, it is better to use the gear oil.
2. It should guarantee that the height of thin grease is higher than that of oil pointer. It is better to change the grease every three to six months. When changing the grease, it is better to use the clean gasoline or kerosene to wash the tank, ball track and gear surface.
