subject: The Main Working Part Of Hammer Crusher [print this page] Hammer Crusher is a kind of crushing equipments in mining industry, and is a advanced equipment in hammer crusher series of technical industry , the use of advanced production technology, first feeding, forming, high efficiency, energy saving characteristics. Into the material in accordance with the needs of coarse, medium, fine,complete specifications; sheet, smooth body.Particularly adapted to the materials used in highways, buildings and large-scale projects. Hammer crusher, also known as rock crusher, in the ordinary hammer crusher, impact crusher, vertical shaft impact crusher and a variety of stone with a hammer to crack down on the broken mechanical principles, the optimized design, manufacturing out of the latest generation crusher product, changing the grate of the material particle size control methods, reducing the wear of the hammer in the crushing chamber. The main working part of hammer crusher is rotors with hammer. The crusher rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate plate. The gap between the rotors and thegrate plate can also be adjusted according to different requirement. The crusher has removed the jaw early-breaking process, as new models of the size of the material once broken,large output, high efficiency, power, saving manpower and resources, reducing the crushing cost ofmaterials.Machine broken stone, not only the specifications, and uniform clear, old-fashioned jaw broken machine and plate hammer to break alternative. This series product is suitable for crushing all kinds of medium hardness and brittle materials. Such as limestone, coal and other materials. Mainly used in cement, mining, coal preparation, power generation, chemical and building materials industry.
