"One-step injection stretch blow Molding Machine research and development, including both the host and mold. The injection stretch blow molding machine is the host and die combination of the two devices, 40% from the importance of both the host and the mold machine, the host only machine mold accounted for 60% of the whole machine. The mold is a "one-step injection stretch blow bottle machine developed focus. Injection parison mold is the focus of development in the mold. Turntable running high-speed and position stability is the focus of the host. Promote the use of rack and pinion synchronous blow mold institutions to improve Clamping repeatability in performance and production efficiency.
Improve molding speed is pursuing the main goal of the pull blow Molding Machine, optimization of heating systems to reduce heating time and improve the operation of conveyor speed of the preform, the preform rapid and stable positioning of the performance and shorten the mold opening and closing, and blow molding, compression head The rise and fall times, increasing the number of molding cavity. The production line is characterized by: the filling of the liquid raw materials do not need the bottle and then cleaning, filling in closed clean environment.4,Multilayer injection preform equipmentThe multi-layer composite bottle is the direction of development, the development of multi-layer injection preform equipment is a prerequisite. Multilayer injection bottle of blow molding monolayer PET Preform Mould is similar to the available single-layer Stretch Blow equipment. Multilayer injection bottle is specially developed for beer packaging, there are three, five.5,Note blow Molding Machine The injection blow Molding Machine and Injection Moulding Machine combined into one with the blowing machine, blow molding equipment. Materials, a wide range of injection blow molding, bottle screw forming high precision, good sealing, seamless high strength products, no scrap cost savings, especially in the pharmaceutical drug bottle industry has made substantial applications. The injection blow Molding Machine direction of development is to shorten the molding cycle, improve the productivity of stand-alone single-mode, reducing the downtime of die change blow speed, optimize heat transfer systems, to increase production.by: sunnies
