ball mill crushers also known as sand, sand is the most commonly used equipment, widely used in Cobblestone, limestone, sand and stone industries, effects what are the of crusher ?Zhengzhou prosperous mechanical engineer from the following five areas to introduce affecting crusher working.
1. material hardness: harder materials more difficult to sand, and the wear and tear on equipment more serious. Sha's slow, low.Therefore we need to note drying equipment on the selection of materials.
2. composition of the material: the material before the crusher with effect more powder, sand, because the adhesion of the powder easy to effect delivery. So for fine powder content item should advance a sieve.Will be filtered out of the powder from the material as much as possible, so as not to affect the normal work Raymond Mill of sand making machine.
3. after crusher crushing fineness of material: high fineness requirements, requiring sand material more, smaller sand.Specific requirements in this regard and, if ball mill there is no special requirement, set the fineness of material is fine.
4. viscosity of the material: the bigger the viscosity of the material, glue the easier. Viscosity of the material will stick to red star crusher sand within the walls of the cavity, if not cleaned in time, this will affect the work efficiency of drying equipment sand making machine, serious may also affect the normal work of sand making machine. Therefore, when selecting material, be sure to note the material viscosity of not too great.
5. humidity of materials: materials containing moisture in larger material easily Raymond Mill stick in the sand making machine, under is also easy to cause blockage in the conveying process, causing sand capacity decrease.To solve these problems, first of all, in the choice of materials would have to strictly control the material humidity, humidity if the item selected is too large, such as sunlight or air dry to reduce the percentage of moisture in the material.
