subject: Raymond Roller Mill Composing Parts [print this page] Raymond Mill is our patent product which is used for grinding barite, limestone, ceramics, slag, etc. Mohs hardness of not greater than 9.3 and humidity below 6% about the costs of flammable and explosive mines, metallurgy, chemicals, building materials industry. Henan Hongxing Mining Machinery produces Raymond mill products, micro-grinding, high-speed grinding, grinding ring, etc. Our Raymond mill is featured with advanced technology, quality, known nationwide, powder mill and high-speed milling machine is the latest development of the national patent. Raymonds general structure, according to their specific role can be divided into six major components, their name and role are as follows: roller: roller is the main working parts, it is the role of the upper and lower two stone disc with similar material from between the two roller pass by the abrasive roller was broken.Cone crusher transmission parts: the drive roller to provide some of the major work force, so do the two rollers at different speeds relative to the direction of rotation, to ensure that roller according to a certain speed, the speed to maintain a certain ratio between the rollers. rolling distance adjustment structure: two radial distance between the roller as rolling away. Lack of this institution, Raymond can not be with a variety of abrasive particle size to adapt to technical requirements can not be changed at any time according to Raymond grinding intensity. Raymond arranged roller tilt, roll on roll faster, and its bearing on a fixed in Raymonds case, its location can not be moved, the next roll is a slow roller through which the upper and lower bearing device can mobile bearing arm, bearing arms and rolling through the spring is connected from the regulatory agencies, so slow roller position adjusting mechanism can be rolled away from the meter change. Change the radial distance between the two rollers to achieve a certain effect of grinding, rolling away from the adjusting mechanism is the main role. rotary kiln:http://www.hxjqchina.com/product-list_38.html cone crusher:http://www.hxjqchina.com/product-list_19.html sand maker:http://www.hx-crushers.com/ feed sector: feeder institutions to play a roller for grinding effect plays an important role in feeding agencies in the top of the roller, from the storage cylinder, Branch bucket, feed roller and the feed valve and other components, the role as follows: a) the abrasive throwing to the right between the two roller grinding area. b) ensure that the material in the two-roller mill area uniformly covered the entire length, thickness and consistency. c) feeding organizations in accordance with changes in production conditions at any time adjust the flow of material into the mill size. Feeding agencies should work closely with clutch roller, rolling mill from close up, feeding agencies rotation feeding: the other hand, stop feeding. d) failure, loose rolling quickly to protect the teeth grinding.Jaw crusher e) the proper limits of impurities into a large grinding mouth, in order to maintain the safety of Raymond. roller cleaning sector: cleaning up body mounted on the bottom roller, broom or brush commonly used roller blade close to the surface, adheres to the roller to remove the powder layer on the surface, the surface roller to maintain a good technical characteristics and smooth roller, brush broom to clean teeth roll surface, scraper for cleaning rolls. suction device: the role of suction devices are three: a) to absorb the work generated by roller heat and moisture, reducing the temperature of objects under the ground, the screen rational improve the abrasive can be.impact crusher b) cooling roller to reduce the material temperature. c) not to make Raymond the dust flying out to reduce environmental pollution, improving peoples working conditions.As the professional manufacturer of complete sets of mining machinery, such as ore beneficiation, Henan Hongxing is always doing the best in products and service.
