subject: Splendid Presentation About Magnetic Separator [print this page] Working principle: After the ore slurry tank into the tank after the water pipe water to the mine under the influence of mineral particles showed a loose state to enter the tank of mine. In the magnetic field, magnetic mineral particles occur together and form a magnetic group or flux, magnetic group or flux in the pulp by the magnetic effect, movement to the pole, and were adsorbed on the cylinder. As the magnetic polarity along the cylinder rotation is alternately arranged, and fixed and at work, "magnetic group" or "flux" in the rotation with the cylinder, due to alternating magnetic poles arising from the phenomenon of magnetic stirring, is mixed in the "magnetic group" or "flux" in the non-magnetic gangue minerals such as falling down and turning in, eventually being sucked in the cylinder surface "magnetic group" or "magnetic lotus" is the concentrate .Concentrate the magnetic lines to the edge of the cylinder with the weakest at the magnetic field in the discharge of mine water spray rinse under water to the concentrate tank to be unloaded, if the whole magnetic roller, brush roller unloading ore is conducted . Non-magnetic or weakly magnetic minerals are left with the pulp in the pulp discharged outside the tank , that is tailings.Henan Hongxing Mining Machinery Co., Ltd is the professional manufacturer of complete sets of mining machinery, for example,vibrating screen,flotation cell Welcome all of you to visit our official website.flotation separator:http://www.hxjq-crusher.com/34.html Basic structure: Wet magnetic separator: Mainly by the cylinder, roller, brush roller, magnetic system, tank, transmission parts 6 parts. Cylinder by the volume 2-3mm stainless steel welded tube, end caps for the aluminum pieces or parts, screws and stainless steel tube connected. Or directly by the motor reducer motor with steeples speed, drive cylinder, magnetic roller and brush roller for rotary movement. Magnets with stainless steel bolts installed in the yoke of the floor, out of the yoke of the tube axis, the shaft fixed with knee arm. Pulling the magnetic system can be adjusted knee arm angle adjustment lever can be fixed after appropriate. Henan Hongxing Mining Machinery Co., Ltd is a joint-stock mining machinery manufacturing enterprise integrated in scientific research, production and marketing. It is located at the High & New Technology Industries Development Zone of Zhengzhou,China with an area of 50 thousand m2 which includes 15,000 m2 of standard heavy duty industrial workshop. Equipments are more than 160 pieces, including large and medium sized metal processing, riveting and installing equipments. There are more than 660 workers including 80 administrators with secondary and senior occupational titles and engineering technicians. In order to promote the competitive strength, the advanced technologies have been introduced from America, Germany, Japan and Australia, which established the international advanced production line, first-class modern testing base as well as research centers of sand maker, mill and mine-selecting equipment. Scientific management, advanced processing technology and innovative manufacturing theory make the company become the mining machinery manufacturing and exporting base in China.
