subject: Mining Ore Concentrator Used In Iron Producing [print this page] The High efficiency concentrator machine of our company is suitable for dehydrating water of the concentration and gangue in the concentrating factory, make the mash of 20-30% raise up to 40-70% about. It is widely used for melting, chemical, coal, non metal concentration, environment protected etc industry. Actually, High Efficiency Concentrator is not a single sedimentation equipment, is a new-type dewatering equipment combining with the filtering property of mud layer.The concentrator mainly blows the trigger two parts by the circular concentration basin and the rake type to be composed. In the concentration basin aerosol subsides in the pulp solid particle under the action of gravity, upside becomes the clear clear water, enables the liquid-solid to separate. Working principleAdd certain amount of congeal dose into the ore slurry which need to be concentrated, make the granules form a roll, quicken the falling speed and complete the process of concentrating.Characteristics:1. Fast concentration speed, saving much time.2. Install inclined plate to shorten the sedimentation distance of particles so as to increase sedimentation area.3. Large capacity of material processing, and high efficiency.4. Applied the complete automatic technology from abroad, advanced technology, easy operation.5. The increase flocculant increases the subsidence solid particle the particle size, thus speeds up the settling rate.6. Installs leans the sloping plate to reduce the ore grain of subsidence distance, increases the settling area.7. The display mud deposits the thick level flocculation, the filtration, to reduce and to enhance the process load the function.Concentrator plays an important role in ore beneficiation which has taken an important position in aligning plant strategies. Leading professionals from the industry have decided to put in efforts to spot ways to make the process more efficient, aiming at zero waste management for sust. Iron ore processing plant is also important in processing phosphate, titanium, chrome, manganese, tungsten, molybdenum, nickel, niobium and tantalum ores. Iron ore beneficiation preparationVery low grade Iron ore cannot be used in metallurgical plants and needs to be upgraded to increase the iron content and reduce the gangue content. A process adopting to upgrade ore is called Beneficiation. Iron ore is upgraded to a higher iron content through concentration. Iron ore is being beneficiated all round the world to meet the quality requirement of Iron and Steel industries. However, each source of Iron ore has its own peculiar mineralogical characteristics and requires the specific beneficiation and metallurgical treatment to get the best product out of it. The choice of the beneficiation treatment depends on the nature of the gangue present and its association with the ore structure. Several techniques such as washing, jigging, magnetic separation, advanced gravity separation and flotation are being used to enhance the quality of the Iron ore.Due to the high density of hematite relative to silicates, Ore separating line usually involves a combination of crushing and milling as well as heavy liquid separation. This is achieved by passing the finely crushed ore over a bath of solution containing bentonite or other agent which increases the density of the solution. When the density of the solution is properly calibrated, the hematite will sink and the silicate mineral fragments will float and can be removed. As the professional manufacturer of complete sets of mining machinery, such as ball mills, Henan Hongxing is always doing the best in products and service. hammer crusher:http://www.crusher-machine.com/3.html cone crusher:http://www.hx-crushers.com/p13.html jaw crusher:http://www.hx-china.com/1.html
