subject: Repairing Your Home Television Three Must Follow Safety Tips [print this page] Whether it is the Centurylink deals that you have in mind to order or a cable TV, the ultimate pleasure is dependent on the television set in your home. The CRT, LCD, LED, Plasma and 3D have their own advantage and disadvantage to reckon with. But whatever your choice maintaining your television in good order is something that you will have to learn with some effort. If you are tech savvy person then you may even want to try your hand at repairing them when something seems to be going wrong with the display, or you feel that there is malfunction that can result in a catastrophic situation. All electrical devices are prone to fire, remember.
You can try repairing television sets at home. Television repairing is not rocket technology; they are easy to do provided that you have some basic tools and know how to use them. Even if you lack some skills it is not difficult to learn them; there are manuals after manuals, do-it-yourself types that can teach you repair a television set in no time. If you have a television set that you intend to dispose why not use it as your study materials to learn television repairing? You may not become an expert technician but it can be a hobby like activity that you can learn. What if you cant put the television back to use? Dont worry, all electrical devices end in landfills anyway. The only difference here is you will use it learn before the final end comes. And that is all to it.
Once you have stop worried about losing your old rickety television, there is no looking back. It will give you all that braveness to lay your hands on them and begin experimenting. But before you set off on the adventure buy a repair manual. Even a book from scrap-book shop will be sufficient, or if you are little tech savvy try the makers website to get some tips on the way the set has been assembled. You can compromise on everything but safety because they are capable of causing bodily harm. Very dangerous voltages and temperatures build inside television sets and you may not know that. Here below are three safety tips that you will find very useful and worth following to avoid accidents.
a.The Hot Chassis Warning is the first thing you need to take care of before you begin working on the television. Ensure that the television set is unplugged from the wall socket before you even remove the panel you will see in the reverse side of the television. Manufacturers use color codes to tell the difference between positive, negative and ground wire. Make a note of these colors. You will need them when you reassemble the television. This step will ensure that you dont receive electrical shocks.
b.Picture Tube Discharge is the second most important step you need to take before you go any further. Remember I told you that there are very dangerous voltages inside the television. And it remains for sometimes until it has been discharged properly. If you are experimenting with a CRT type television, then you will see three picture tubes one each for R, G and B. The right way to effectively discharge is to connect the anode of the picture tube to the grounding by an electrical conductor with a proper insulation glove.
c.Most of the repairing often means soldering the different parts, especially the wires to the components. Soldering is an intricate process. When television sets are assembled in factories, technicians use ultra wave solders. But then you will not be lucky enough to have one with you, so the next best thing is a low wattage solder. Rosin and lead are the two chief materials that you will be using to solder, and the quality of these materials will determine how good your solder is going to work. So buy only well known brands and read the instruction leaflet that accompanies them.
