subject: All You Need To Know About Installing And Maintaining Above Ground Swimming Pools. [print this page] If you are preparing to purchase an above ground swimming pool, or simply wish to investigate the possibility thereof, then there are a number of things you will need to understand. New owners of above ground swimming pools frequently find it challenging to install and preserve them. This is purely because of a lack of understanding pertaining to above ground pools.
In this short article I hope to pass on some essential knowledge by addressing a number of the installation and upkeep troubles, leaving you with a lot more time and energy to enjoy your new above ground pool with your buddies and family. So let us get started.
Since your above ground pool will likely be utilised by the whole household, including them in the discussions and decisions regarding the location of the pool would be wise. Make sure to have an accountable person on site throughout installation to check that the pool and filtration system are placed in the right location.
It could be ideal to have the above ground swimming pool and also the sand needed delivered a few days ahead of the actual installation day. Have the sand placed as close as possible to the area where the pool will be installed, but not inside the pool region.
You will need an energy supply at the pool, so make certain that this is completed immediately after the pool has been installed. Please be aware that electrical extension cords can cause harm to the swimming pool pump.
Often pool installers do not get rid of the extra dirt from the site, so think about reusing it in another area of the yard. The moment you have acquired your above ground swimming pool, study through all the instructions and warnings very carefully.
As a way to prevent sand and dust from getting into your pool once you first start up the pump after putting in new filter sand, make use of the backwash cycle for one minute prior to running it on filter cycle. As a way to stop leaks, use Teflon tape on all the threaded fittings.
Never ever over tighten the filter fittings and pressure gauge. This could cause harm to the filter head. With all the expansion and contraction of the hose, clamps might work their way loose. Always check and retighten the hose clamps and fittings a few days after the original installation.
Always add chlorine to your above ground pool immediately after sunset. This will yield probably the most effective results. Making use of a solar cover on cold nights will keep your swimming pool warm and extend your swimming season. Your solar blanket will need to be protected against direct sunlight when it is not utilized. Do not leave it on your lawn because this could damage your grass.
Using a extended backwash hose will help get rid of extra water around the swimming pool region. Your pool is likely to collect leaves and debris, so enable debris to flow toward the skimmer by producing a circular motion. This can be accomplished by adjusting the water return eyeball.
Changing your filter sand every alternative season will produce the best results. Using algaecide will help stop the development of algae. Weightier vacuum heads need less applied pressure and make vacuuming less difficult and faster.
For optimum filter efficiency, place the filter system as near to the swimming pool as possible. Do not settle for a substandard filter. The better the filtration system, the less time you will need to dedicate to maintaining your above ground pool.
I trust that this short article has answered all of your installation and maintenance concerns regarding above ground swimming pools. For more information, above ground pool prices, or to buy above ground pools, pay a visit to http://www.aboveground-swimming-pools.com.
