subject: Carpet Maintenance Guides: Dealing With Carpet Stains And Vacuum Cleaning [print this page] Carpet cleaners and other cleaning solutions are best when it comes to thoroughly cleaning your carpet. But the draw-back of these cleaners is when you use them that often because these cleaners can damage your new carpet very fast. Furthermore, if you are using using strong chemical cleaning solutions it will still have a long term effect. There are a lot of ways to get rid of spills on the carpet easily.
Carpet cleaning requires preparation and you need to know what to prepare. Here are some tips on vacuum cleaning and dealing with common carpet stains:
How To Vacuum Your Carpet
Like many other type of flooring to clean, carpet flooring would also require vacuuming. Vacuuming the carpet at least once a week will help prevent dirt and dust build-up especially on the inner part of the carpet's fiber. This way you can preserve your carpet's beauty longer than usual. Clean twice as usual parts of the carpet where people sit and walks most of the time. For sure, dust is thick on these areas.
In dealing with wall-to-wall carpet flooring, you need to divide the area into 4 quadrants. Make sure to clean each quadrant first before you proceed on the next quadrant. Vacuuming in a slow pace is more effective than cleaning fast.
To get rid of strong odor of your carpet, use baking soda to adhere this problem. apply the baking soda on the area where it stinks. Apply only little amount of baking soda as it will cause clogging in your vacuum. If Possible do not do this too often. Apply this method at least once a week or twice a month is strongly recommended. Baking powder like dirt can cause clogging on your machine which is why you need to do this to a minimal.
Now that you know the tips on vacuuming your carpet, let us move forward with proper cleaning and effective remedies to clean spills on the carpet.
How to Clean Stains on Your Carpet Flooring
When it comes to carpet cleaning, there is no better rule than to act immediately. The minute you spot spills on your expensive carpet deal with it right away.
The very first thing you must do before applying any cleaning solution is to smudge the area and get as many stains as possibly as you can. But do not over do it as you may just do to your carpet what you don't wanted-damaging it.. See to it that the chemical you are using to remove the spill is 100 percent carpet friendly. Cleaning solutions that comes with strong chemicals could give you the following problems:
diminishing of the fibers of the affected region.
tinting, one that is quite impossible to fix.
damage the carpet's fiber and sometimes burn it.
When cleaning the problem don't continuously rob the spot since you might end up spreading the spill further. When applying your stain cleaner, see to it that you first begin on the outer region of the stain. By doing this you will avoid it from spreading and that your area to clean is as is. Blot the area free from moisture after you apply the solution. If there is still moisture on your carpet, place a dry towel on top of the affected area and place something heavy to press it down. This will allow the moisture to seep into the towel completely.
practicing these tips is as important as learning them. Practice what you have learned and you will surely learn more tricks in carpeting. It really makes a difference when you know how to take good care of your carpet, not to mention the cost of having to replace your totally damaged carpet.
