subject: Carpet Cleaning Tips: Cleaning Carpet Spills And Vacuum Cleaning [print this page] Commercial cleaning solutions are good when it comes to effectively cleaning your carpet.But if these cleaner are used often, they will increase the chances of your carpet getting worn out. In addition to that, spills and carpet stains are as annoying when removed using commercial cleaners. There are a number of ways in dealing with carpet stains professionally.
Here are some of the tips on how to maintain and clean your carpet flooring:
Like any other type of floor cleaning, carpet flooring requires vacuum cleaning. To prevent dirt build-ups and allergen getting trap in your carpet, vacuuming it every week is essential. This is so that you won't be having problems in the future. Your goal is to keep your carpet in good condition for as long as you can. Furthermore, clean twice than usual the areas of the carpet where people pass by often.
In cleaning wall extended carpets, Divide the room into 4 equal parts. The reason behind is that you'll probably clean the area thoroughly when you divide it by sections rather than attempting to deal with it as a whole. Picking up a slow pace in vacuuming will be more effective than doing it in a swift.
For odor problems, simply apply baking soda on the carpet before cleaning. First you need to sprinkle the baking powder all over the carpet. See to it that your not applying too much soda because it will damage your vacuum in the long run. Perform this trick as minimal as possible to avoid damaging your vacuum. Baking powder like dirt causes your vacuum cleaner to clog, which is not good for your machine.
This ends our topic on how to vacuum your carpet. Now we move on to our next topic which is dealing with spills on your carpet.
Cleaning Carpet Spills
What makes carpet spill threatening is when you don't act immediately. It is because once its dry, you'll have a hard time removing it completely and the next thing you'll realize is that you're going to need a new one.
Remember, the first thing you need to do before applying your cleaning solution, is to blot the area and get as many stains as possibly as you can. But do not over do it as you may just do to your carpet what you don't wanted-damaging it.. Also, choose the best cleaning agent you are going to apply on your carpet. Make sure that it will help solve your problem rather than make it any worse. Cleaning solutions that comes with strong chemicals could give you the following problems:
fading of color of the affected area.
discoloration, which is quite impossible to repair.
damage the carpet's fiber and sometimes burn it.
Never rub the affected area because this might cause the spill to scatter. Apply your spot cleaner starting from the outer portion of the problem and move in-wards. Blot the area free from moisture after you apply the solution. If the moisture is still there after buffing, what you can do is put a towel on top of the area followed by a weight to press it against the carpet. This will allow the moisture to seep into the towel completely.
If done correctly, the tips you learned in this article can take your carpeting a long way. Learning these tips will surely put you advantage, considering the cost of having to repair or replace it.
