subject: Police Strobes And Police Light Bars For Highly Efficient Police Cars [print this page] The combination of police strobes and police light bars can be extremely powerful especially when you want a very reliable and bright source of warning lights mounted atop an emergency vehicle. Firstly, you will have to pick light bars which fit your purpose. There are mini bars whose length varies between 16 to 24 inches and are not thicker than 2 to 3 inches in most cases. These are slim, dual or triple unit bars that can be used with temporary magnetic mounting kits. There are the medium and full-length light bars as well when you want a much bigger warning light source. The medium bars are around 44 inches in length, while the full length models are more than 72 inches in length.
There are several varieties of police strobes as well which can be used based on the situation. There are single roof, fixed mount strobe beacons that are in place to provide solid color, focused lighting. There are the magnetic rotating beacons that can be temporarily mounted on any vehicle. Then there are the gyratory beacons that could rotate 360 degrees for a brilliant warning signal. There are specialized strobe tubes as well which are smaller and could be mounted inside composite headlights, tail lights, turn lights and brake lights. These add brightness and provide additional functions such as programmed and controllable flashing for greater visibility. An improvised variety of the strobe lights is the mini strobe bars where multiple strobe light heads are usually combined together, with diamond mirrors installed in between them for greater reflectivity. Sometimes the strobes can be combined with police light bars for the greatest emergency lighting effects.
You will come across full length police light bars which usually cost over $1000. However, these light bars offer a large array of functions, combining the efficiency of programmable, flashing LED modules and standalone strobe lights. Such light bars are often seen with staggered formations of police strobes for good visibility in all the directions. Similarly, the light bars have 4 to 6 linear LED modules along with 4 corner strobes to cover every single direction. In some cases, the light bars also make use of gyratory strobe bars for additional effect.
Some police light bars come with interconnectors and shielded cables which let you connect the LED modules, the police strobes, additional work lamps and optional takedowns and alley lights. The kit lets you synchronize the flashing of all the lights so that a very powerful warning signal is created in all directions. Mega burst flash patterns maximize the lighting output so that the warning flashes can be picked up from a long distance too. Such equipment is usually accompanied by sophisticated switch panels which have all the controls required to operate the functions smoothly. From intensity control to altering flash patterns in quick succession, it is possible to operate emergency lighting functions without high profile training. This ease of operability adds to the efficiency and effectiveness of these lights.
