subject: Steps to Change a Filter on a Water Filtration System [print this page] A water filtration system comes in wide options of shapes and sizes so you can choose the best ones for your needs. If you have the type of under-sink, it is important to change it at least in every six month so you can keep the functionality better. In this case, it is important for you to change it continuously so you do not need to spend more money with hiring someone. This article will explain about this kind of thing.
1. First of all, you must close the valve of cold-water which will feed the filter. In this case, you can do the next process rightly so you can make it beneficial for you.
2. Then, you need to release any kind of pressure with turning on the faucets of cold and hot waters. And then, you must leave them in the open condition. For some models of filters, you just need to press the valve of vent on top of filter for releasing the pressure rightly.
3. Also, it is needed to turn the clockwise with the use of sump wrench that is coming with the filter for removing it. In this case, you must be careful so you can make the process safe for you.
4. For the next step, you need to put and set the O-ring seal. Then, you must remove the filter cartridge which is used.
5. You must clean the inside of sump with soapy and hot water so you can ensure that you can clean it very well. After that, you must insert the new cartridge for your needs. To install the cartridge, you must follow the instructions provided at the label so you can make any mistake in the process installation.
6. For the next step, you must great the O-ring rightly with the use of silicone lubricant. And then, you must line up the sump with the filter and make it tightening with turning the sump counterclockwise.
Steps to Change a Filter on a Water Filtration System
