subject: Cast Stone Mill Working Principle [print this page] Cast Stone Introduction and Usage: Cast Stone Introduction and Usage:
Cast stone (cast stone) is made of a processed silicate crystalline material, using the natural rock (basalt, diabase and other mafic rocks, and shale) or industrial waste slag (blast furnace slag, steel slag, copper slag, chromium slag, ferroalloy slag, etc.) as the main raw material, crushing the crystal made of ingredients, melting, casting, heat treatment processes arranged in neat, hard texture, delicate, non-metallic industrial materials.
Cast Stone has good corrosion resistance, wear resistance, but its toughness, impact resistance is poor, cutting difficult. Cast Stone Products Cast stone pipe, cast stone composite pipe, cast stone and cast stone, has been widely used in the industrial sector of electricity, coal, mining, metallurgy, chemical, construction and other serious wear and tear, corrosion site. Extend the components or equipment service life of other materials, ten times or even several times. Because of the poor toughness of cast stone products, higher hardness, it is difficult to machining, general by a certain shape and size of processed products. Fixed to masonry and mosaic.
The main purpose of the cast stone is used in industry as anti-corrosion and wear-resistant materials, such as acid, alkali storage tank, reaction tank, acid washing the pool (slot) anti-corrosion lining; a variety of ores, ash, and tailings chute and pipelines, as well as milled resistant liner. In the construction can be used as a warehouse floor, the public buildings of the aisle, stair step, plant acid-resistant floor and wall panels, as well as hydraulic engineering, dam veneer and rows of sand holes lining and so on. Light-colored or colored cast stone instead of marble, granite, for both interior and exterior materials and ground materials. The cast stone material in the building materials equipment instead of from the impact of metal materials, wear parts used in the device. Such as belt conveyor idlers, spiral transports cavity, the surface of the mixer, winnowing the hammer mill duct wall, pneumatic conveying pipe lining and so on.
Cast stone mill, cast stone mill equipment
Cast Stone Mill is mainly applied to superfine powder processing of 6 non-flammable, low hardness, Mohs hardness of brittle materials, such as wollastonite, chalk, limestone, dolomite, carbon black, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, wollastonite, gypsum, alunite, graphite, firefly stone, phosphate rock, potassium ore pumice, etc. over 100 kinds of materials, fine finished particle size can be adjusted between 325-3000 mesh, yield up to 0.5-12 tons per hour.
Cast stone mill working principle:
Chunk of material crushed by the elevator into the storage hopper, then by electromagnetic vibrating feeder evenly into the host of the grinding chamber, the material into the grinding chamber, through shovel blade into the space between the roller and the ringfans for being crushed , air will be blown into the grinding room, blowing the powder into the analyzer, sorting pressure grated up to fall back less than the fineness of the grinding chamber re-grinding, qualified powder into the air refined cyclone powder collector after the separation of powder and air discharged from the discharge port shall be finished, the air from the top of the return air duct to return the fan within the wind path is circular, and the flow in the vacuum state. A result of the grinding material in ultra-grinding machine grinding room, a certain moisture content, grinding, heat causes the water droplets evaporate, and the machine pipe flange connection has seal lax, outside the gas is inhaled, the revolving airflow wind increased, in order to ensure the mill in the vacuum state to work properly, the increase in gas flow through the remainder of the trachea between the fan and the host into the bag filter to be purified and released into the gas.
