subject: How To Use The Feeder Will Not Damage The Machine [print this page] How to Use the Feeder Will Not Damage the Machine
Feeder ore production enterprises often the application of machinery, how to correctly use the feeder Red Star machine to tell you: There are the following five points Notes
, Feeding machine in the start time, the above can not put it in, as it will burn out the motor because the motor to withstand the pressure is too large. So each time you start the feeder must check to see if the above is not something. If any, must be timely cleared away, and then start the machine.
Second, the feeder is to rely on the belt to transport materials, so be sure to timely check the belt is intact, whether there is loose, whether elastic appropriate. Only all full play to the performance of the machine, in order to achieve maximum production. Also so as not to damage the machine.
Feeder various parts are gears and chains to transmit power, so it is necessary to make these gears and chains to ensure maximum lubrication, so as not to damage the machine because of a lack of lubrication.
Ore production will have a lot of dust, so that will make the feeder control box to accumulate large amounts of dust, the long run, it will because the dust makes the internal short circuit occurs, it will damage the electrical circuits and other parts . So in each period of time to clean up the dust in the control box.
The main driving force of the feeder motor, the motor speed is very high, so in the transmission of power is necessary to use a reducer reducer. In the usual application must remember to check the motor and reducer is abnormal. And every time to carry out maintenance on the gear of the reducer with gear oil.
With its high quality products such as Ore vibrating feeder, Mineral impact crusher, Limestone rotary kiln, Vibrating feeder, Rotary dryer, Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.
