subject: Connect Your Mac Mini Without Any Hassle [print this page] One of the most innovative computers that have been brought by Apple is Mac Mini. You might think at first how to configure the computer with everything in such a compact situation. But the set up process is not at all difficult.
Make sure you configure the Mac Mini in proper manner so that no hamper occurs to it. To get the desired result, you should avail expert PC repair. Mac Mini set up is much easier than normal desktop computers. You just need to know the right methods.
The steps for configuring your Mac Mini:
1. Before you start the setup process, make sure you have all the equipments before you. All the necessary components before you configure any electronic device should be there. Your Mac Mini comes with an AC cord; A DVI to VGA adapter and one power adapter.
2. Now carefully position and attach power to your Mac Mini. Set the computer only where you wish to use it; like- a desk or your study table etc. The surface of configuring the Mac Mini should be hard and flat. Then join the AC cord to the power adapter. You can easily detect your AC cord and the power adapter because these are the only two cords which you get with your Mac computer.
Now plug in the lead end of the power adapter with the exact port at the back of the Mac Mini. And the AC cord should be connected to a working power outlet on the wall or power strip. The remote tech support group can help you with the connection procedure.
3. Now wire the internet connection for your Mac Mini. However, in the newer version of the Mac Minis" a wireless card is already present. If you already has an existing wireless network then don"t follow this step.
Plug in one end of the Ethernet cable to the correct spot at the back of the Mac Mini and the other end of the same cable to your cable modem; or DSL modem; or Wireless Router. The connection depends on which network device you are using.
4. Now this is the time to connect your keyboard and a mouse to the Mac Mini. You need to buy or arrange these devices because you will not get keyboard or mouse. The connection will be made via USB. You can also use your Apple keyboard, if you have. But make sure whichever mouse or keyboard you connect; it will be through USB.
5. Finally it"s the time you connect the Monitor with the Mac Mini. Your Mac Mini comes with a standard DVI to VGA adapter. That means you do not need to use this adapter with a DVI cable. The DVI cable which comes out from the monitor; directly connect back to your Mac Mini.
In case you are using a VGA connection, you need to connect the DVI-to-VGA adapter; then to the back of the Mac Min. and for DVI you need to buy a separate adapter.
After all the adapters are connected, you can just press the power button and enjoy your ride to the Mac Mini world. If you need any assistance on online computer repair then you can call ring any online computer services.
