Board logo

subject: Guide for using the laptop battery right [print this page]


Graduate your laptop battery to optimize its functioning

There is microprocessor software inside the laptop computer battery, which calculates the battery volume during the charging/

discharging. Batteries must be calibrated from time to time to guarantee correctness of the time and the percentage

displayed on the screen. You must apply a all over cycle of charging and clearing the battery at the

First of using the computer, and repeat this cycle every two or three months. The bearing down and discharging

procedure is as follows:

1Adjust the ability provide option primary: Right click on the screen and select Property ->

Screen Saver -> Power Supply -> Power Use Scheme -> Portable. In all the subsequent operations

such as When Computer and Use Battery, select Never. Under the Alert option, deselect Alert

for deficient battery and Alert for serious battery shortage.

2Disconnect the superpower adapter and use the battery until the computing machine is powered off due

to debilitation of the battery.

3Associate the power adaptor until the battery is charged to 100%. Ahead initial use of

the computer (or resuming use of the computer after long-term computer memory), the battery must be

charged to full and dismissed for thirty-four times to optimize the performance. The charging process accepts more than

five hours.You must discharge the battery to let the computer power off, and then charge the battery to 100% to

calibrate it. Then you will be able to connect or disconnect the power supply anytime regardless of the status of the battery

volume. Moreover, you can perform a deep charging and discharging cycle under control of the protection circuit

in a time segment to calibrate the electricity statistics of the battery. However, this does not increase the factual

Electrical capacity of the battery.Tips: When the battery becomes "discharge", the computer enters the hibernation mode forcibly.

The battery reserves a certain electricity volume to ensure that the computer can hibernate for a time segment.

When the battery is actually consumed, the computing machine is powered off forcibly. At this time, any afford documents will

be lost.

Storage of laptop battery(such as Dell 1520 battery)

If the battery is stored for months in the closed-circuit mode, the battery is damaged. If the battery needs to

remain idle in a month or a longer time, remove the battery out of the computer, bearing it to 60%-80% and store

it in a dry, cool and clean place. If the battery continues idle for a long time, the electricity of the battery is ultimately

lost and the battery may be damaged. Therefore, after the battery is stored for a time period, it is necessary to

perform an effective charging and clearing cycle for the battery. By performing a complete efficient bearing down

and discharging cycle for the battery each month, you can assure a right storage status and a sensible avail

Life history of the battery.

If you are looking for laptop parts or laptop accessories then you are lucky to find us. Udtek.com offers high quality and cheap price of Dell laptop batteries,and so on.

Guide for using the laptop battery right

By: youlanda




welcome to loan (http://www.yloan.com/) Powered by Discuz! 5.5.0