subject: Designed The Firefox Parameters To Enhance The Web Browsing Speed [print this page] 1.network.http.pipelining 1.network.http.pipelining
Entered in the Filter network.http.pipelining, double-click the assignment to true, default is false. If you do not find this key, you can right to create a new Boolean, her assignment to true on OK.
As I explained in the past, this key is activated, Pipelining also issued a multiple of the connection request, and thus enhance the effect of the connection speed. Most sites on the network are based on the HTTP protocol HTTP1.1 can support multi-threading the connection request, this operation can reduce the time of Firefox page is loaded. But not all of the web server to support this operation, so when you modify the key is to look a little less than the actual effect, please do not curse me.
2.network.http.pipelining.maxrequests
In the Filter to enter network.http.pipelining.maxrequests, double-click and assign to 8, the default key for 4.
3.network.http.proxy.pipelining
In the Filter to enter network.http.proxy.pipelining, double-click and assign to true.
These two optimized reasoning as above, not more to explain here.
4.network.dns.disableIPv6
Entered in the Filter network.dns.disableIPv6, double-click and assign to true.
IPv6 increases the IP address is an IPv4 address from 32 to 128, which can support a larger address space, when the user terminal connected to the an IPv6-capableDNS server, send requests, perhaps the server-side error is returned to the user. Firefox can this all perspicacious, but at the same time correcting in Firefox will inevitably lead to delay of the signal, so here we took her assignment to true, disable her.
5.content.interrupt.parsing
Right New Boolean value, and key named content.interrupt.parsing the assignment to true.
Default this key does not exist. We activate this key, when the target page loads, Firefox, according to a certain frequency to interrupt the parsing process, continuous feedback to the user of pages of information she collected, a bit like the meaning of the streaming media. At this time of Firefox is very smart, not a tendon has been drilled horn. In the following, I will specifically talk about this key charm.
6.content.max.tokenizing.time
Right New Integer value, key to named content.max.tokenizing.time assignment 2.25 million.
This key role is to specify the processing cycle, a cycle of events, where the unit is microseconds, and if I did not count wrong. Theoretically when we get the value the smaller the page will load from the visual, the more smooth, because Firefox will feedback back to resolve to the web page information in a very short unit of time. But this would no doubt delayed the web page as a whole load of time, so we might as well take this cycle, in theory, can speed up page load.
7.content.notify.interval
Right-New Integer value, with the keys content.notify.interval assignment 750 000.
Load a page is actually a lot of learning. Let's put a slow-motion, let's first in a very professional web page information received by the terminal for the first time is called the pre-load the page, this page may be incomplete picture or text, or other media files. Request to us from our first sent to the remote host to connect the terminal to receive the pre-load the page it takes time, we want to define key. Theory when we set very low this time, will certainly be faster to get the so-called pre-load the page, but this is a Banded practice, so that virtually actually increased our overall page load time. Less than 100,000 will be in accordance with the official version, the lower the performance of Firefox, all right, then we put her Biao to 750 000.
8.content.notify.ontimer
Right new Boolean value that key the named content.notify.ontimer assignment to true.
In order to make the entry into force of 750,000 microseconds we set above, also need this key to activate. Only two key co-ordination, to be effective.
9.content.notify.backoffcount
New Integer value, right-key to named content.notify.backoffcount, assignment 5.
This key control Firefox's built-in counter to zero before you load the page returns the number of times. We will target page is divided into multiple parts to download, downloaded the one part, the counter zero time. -1 Is no limit to the value of 0:00, this feature is disabled. Here she was set to 5, when the number of returned to five pages in this section has not been fully downloaded, then the rest of the cycle does not have downloaded the web content will not be set in accordance with our notice, as before five times as a little bit of handling back, but a one-time download finished. Means that the download process in this part of the website, Firefox, total feedback to us six times information, the first five times the time interval is set in the above key cycle of 2.25 million microseconds, while the sixth and final time is no time limit, when the rest of the next over, when feedback.
Only when we mentioned above content.notify.ontimer key to true, where the settings to take effect.
10.content.switch.threshold
Right-New Integer value key named content.switch.threshold, assignment 750 000 is three-quarters seconds.
We mentioned in the previous a key content.interrupt.parsing, through the activation of her actually in the process of reloading the page with Firefox, interaction, after all, the heart of every one of us is full of love. Turn content.interrupt.parsing activated when the page loads Firefox there will be two modes of operation: high and low frequency interrupt mode. When using high-frequency mode, the Web page feedback frequency is also high, and we sat in the front of the display to see the page loading process will be more smooth. Web feedback frequency at low frequencies is relatively low, but this time but to speed up page load time. When we move the mouse or touch keyboard, high-frequency mode is activated. After a certain period of time, we did not touch the mouse and keyboard, the program has not received any instructions issued by the mouse and keyboard, Firefox will automatically enter a low-frequency mode, a period of time, that is, we are here to the specified value.
11.nglayout.initialpaint.delay
Right - the New Integer value key named nglayout.initialpaint.delay assignment 0.
Actual delay of the entire page display speed, but because users prefer to read the page before the entire page is completely cut into (like streaming), so here is the value zero, accelerate user reading a web page speed, and sometimes reading speed and loading speed is not directly proportional.
Stable network conditions, optimize indeed will play some of the effects, not just the psychological effect, speed up your browser and can be a little reference.Click Here To Learn More About Pc Error
