subject: Modification Of Gas Furnace To Save Energy Two [print this page] Gas furnace charging, slag removal, air concentration of electronic control, simple operation, the workload of small, single person on duty can be. Gas furnace with the overall design, easy installation, can be placed directly on the ground plane, do not need to dig into the pre-built foundation, both with external heating with a furnace can also be equipped with a stove and more. Series gas stove provides a green, efficient and affordable heating, those who need to heat the place, may be its support. The furnace gas has been widely used in heat treatment furnace, forging furnace, crucible, mold shell furnace, oven baking bag, resin thermal sand regeneration furnace, glass melting furnaces, refractory ceramic kiln firing fields of energy saving technology transformation. Applicable requirements but also the temperature at 1450 for the following drying, sintering, warm heat source and other equipment supporting the transformation. Product Features: Horizontal moving bed pressure gasifier ash tray in the dry gas furnace made on the basis of development, it draws on the advantages of dry ash, and slag using a patented reciprocating body is my has introduced a new generation of intelligent energy-efficient environmentally friendly products. Series gas furnace is designed for small and medium sized energy users, is the furnace, oil furnace, gas stove the best choice for energy-saving renovation. The furnace compared with the traditional gas furnace has several features: a unique structure of the ash tray, grate slag always be protected, do not need the traditional gas furnace brazed bar way high and low fire detection layer under the protection of the grate. Reciprocating grate type slag patent agencies, with a strong breaking residue, loose slag, ventilation effect. As long as bond is not smoke, smoke-free lump can be used. Large cross-section water-sealed tank explosion, responsive, safe and reliable. Automatic water level control, automatic alarm. Cancel gland pore structure fire detection, water jacket Needless to produce high pressure steam, furnace water jacket pressure from high pressure (P 0.2MPa) into pressure (P = 0.01MPa). Air gas furnace open at any time stop function can be linked with external heating, to achieve automatic control of temperature. Using direct-fired technology, the gas yield with temperature changes, with the use of production, shutdown stop gas; pressure have unlimited time to prepare oven; restart the pipeline does not need emptying, purging and other operations. Third, the electrical equipment. Although the "gas furnace design" GB50195-94 identified on the bottom of the main plant and operational level is a non-explosive environment, the gas plant without making the user requirements, but the top of the furnace and pipe laying workshop should belong to an explosion dangerous environment. Because the gas in the furnace and high-pressure pipeline is in charge of trail maintenance and management settings are diffuse, easily leak. And increases furnace is to rely on coal and coal ash lock hopper and ash lock hopper to close the high pressure gas furnace, high pressure inside the lock hopper shall release the gas can be, once Mifengbuyan or operational errors, the gas will spray, easy to form an explosive mixture. So in this part of the lighting and power consumption should use explosion-proof design and creation of CO gas alarm, to better meet the fire safety. With its high quality products such as dryer machine and sand maker, Hongxing Machinery has ascended in the front rank of the world in the exporting of mining equipment.Sand making machine:http://www.hxjq-crusher.com/58.html Cement production line:http://www.crusher-machine.com/38.html
