subject: High Intensity Strobe Warning Lights For Increased Efficiency [print this page] Strobe safety lights provide all the characteristics that you come to expect from emergency warning lights. They are versatile, tough, reliable and most importantly, have a wide array of features which come handy in every kind of criticality. Strobe warning lights vary in size from just a 2 inch light head to much bigger ones. These can be surface mounted easily on flat and curved surfaces and you can get rubber pads to make sure that the finish on the surface isn't really damaged by the installation. You can also install rubber grommets and compression gaskets to add a further degree of resilience to your warning lights. The strobe lights are well sealed with encapsulation from excessive moisture, dust, corrosion and vibration. They can provide higher intensity lighting, both in solid steady state as well as in flashing states depending on the requirement.
Strobe safety lights do not need an external flasher considering that they come with built in flash patterns that greatly add to their efficiency. They can have anywhere between half a dozen to couple of dozen flash patterns depending upon the complexity of the equipment and the cost. However, the ability to flash at high rates with an intense lighting makes the strobe warning lights a huge hit with emergency crew. Besides, strobe lights can be operated as standalone equipment without much paraphernalia. There are strobe tubes which can be installed inside headlight mounts at the center of parabolic reflectors to strengthen the lighting in the front of the vehicle. The same strobe tubes could be mounted close to the rear deck in the tail, turn or brake light assemblies.
The strobe safety lights come with a very smart LED assembly with the light from the diodes enhanced through optic spreading filters or simple domes. UV stabilized, wide angle, Lexan domes with smooth exteriors not only prevent the dust from blurring the lights but also provide the advantage of altering the color of the lighting emanating from these strobe lights. The best part about the strobe warning lights, is that they can be used as multi-colored beacons too when all round lighting is required. In short, the strobes do not have a specific mounting position or procedure and can be used as an excellent makeshift option installed in the front, rear or on top of the vehicle.
Strobe safety lights can be easily staggered in terms of orientation of the light heads. Gyratory strobes are just as effective as well. A very innovative solution is the use of mini bars with LED strobe warning lights beautifully complemented with reflectors or mirrors to maximize the light output from these strobes. ABS flanges and non-fluted lenses are also provided with the equipment. Sometimes the strobes also have optional flanges. Split and solid colored flashing apart, strobes are also preferred for high intensity bursts that can be spotted from a long distance, thus serving the purpose of warning lights very effectively. Fully encapsulated strobe light heads can also be mounted on vehicle roofs.
