subject: Development Trends Of Dryer Machine Industry [print this page] Dryer in the industry, in order to evaluate the performance standards of a dryer is probably the only three basic criteria! "Are" refers to the materials into the dryer equipment in the same amount of materials case out, the moisture content of the materials symmetrical and does not appear, this case half of the moisture content of half of the moisture content. "Dry" refers to the characteristics of the dryer the most basic materials into the dryer equipment is wet water. Out of materials should be moisture to evaporate!"Quantity" refers to the technical aspects of the characteristics of the dryer equipment!"Quantity" literally have enough space to complete the drying of the material in order to both have enough space on the dryer equipment but also to ensure the material when the moisture content of it than than the overall performance of the dryer!
Red Star machine in the machinery industry in the dryer on the production of R & D is the right degree! Red Star machine below the rotary drum dryer, for example to analyze the current trend of development of the dryer! The main body of the rotary drum dryer the slight tilt (level) and can be the rotation of the cylinder body, the wet material by the end of the accession, after the cylinder internal contact through the barrel of hot air or heated wall dry. The drum dryer is a well received by high-temperature heating and chieftransportation equipment, have a wide range of applications in food, chemical, metallurgy, building materials and other industries. Practical dryers minimum diameter of0.5 meters, a maximum of 3 meters or more. The short length, about two meters long up to 50 meters. With China's accession to the WTO and the rapid economic growth, the proliferation of products of these industries, it is inevitable to generate a greater demand for rotary drum dryer. New rotary drum dryer is to be pursued, its novelty lies in the dry air from the center tube through the branch pipe and sprayed into the rotating tube wall, it is not only the heat and mass transfer rate is almost doubled, and small size, simple structure, low cost, it is these years, the major innovation in the field of rotary drum dryer.
Rotary drier compared with other drying equipment, large production capacity, continuous operation; simple structure, easy to operate; failure, low maintenance costs; wide range of applications, the fluid resistance is small, you can use it to dry granule-like materials, for those adhesion great material benefit; operating flexibility, and allow the flow of the product on the production have a greater range of fluctuation will not affect the quality of the product; cleaning easy. Latest target of these are the series of the dryer must be the most demand! Retain the original "were dry, the volume" on the basis of the current development trend of the dryer!
