subject: Introduction Of Dryer Dust Removing Technologies [print this page] Application characteristics and scope of the industrial dryer dust skills: due to the characteristics of the dryer exhaust large amount of wind and water, dew point, condensation, dust concentration, the point of discharge, and a wide range of pollution, dust skills a major difficulty. Use the dryer for more environmentally friendly, completelysolve the problem of the end of the dryer exhaust dust, my co-years of consumption practices resume and the utilization of user feedback, and then check the dryer dust related materials to share with you here and something about the three dryer dust removal technology:
1. Cyclone Skills. The working principle is the role of the fan, the dust stream by imports at high speed along the tangent direction to the dust collector volute, from top to bottom as the spiral rotation of dust particles in the role of centrifugal force, left behind along the wall to the outer wall, and spin, with the contraction of the cone steering axis, the lower part of the resistance and return, along the axis of the bottom-up spiral rotation by core discharge pipe. The outer wall of the dust particles in the gravity and down the airflow driven along the wall fall into the ash bucket, to achieve the purpose of dust.
2. Bag dust skills. Dryer anti-condensation glass fiber bag dust collector is ideal for dust purification equipment. The device uses computer control, the sub-room cleaning, regular cleaning, and equipped with a temperature sensing display, over-temperature alarminstallation, CW300-FcA anti-condensation glass fiber bag, which can effectively prevent the condensation of bag will not burn bad bag. Two dust removal process of the dryer toa LFEF7 358-HSY / H anti-condensation bag dust collector, determined by the environmental protection section, volume of emissions per hour 42621m3 imports dust concentration for each standard cubic meters 69620mg The export of dust concentration of 147mg per standard cubic meter, the national emission standards.
3. High Voltage Electrostatic Precipitator skills. High Voltage Electrostatic Precipitator skills 50HZ, 220V AC to DC added to the corona lead to 100kw pole (cathode) to form the uneven voltage electric field to gas ionization to produce large amounts of negative ions and electronic, thereby enabling the gas dust charged into the electric field. In the role of the electric force, charged dust tends to the opposite electrode (usually anode pole) for the dust to rely on rapping fall into the ash hopper discharge to complete the purifying process.
