subject: Simple Facts About The Bmw Bm54 Repair [print this page] Having a BMW BM54 repair done is easy the hard part is getting to the radio unit in the first place (after of course you have diagnosed the fault and made sure the radio is the problem). You will need to locate and extract the BM54 unit so it can be taken or sent to a repair site.
The actual BMW BM54 repair is normally so simple the unit can be returned to you on the same day it is received, or done in a couple of hours (if you take it in to a repair centre yourself) to be picked up on the day you drop it in.
The BMW B54 radio unit is made by a company called Becker, whose high class audio has been keeping BMW and Range Rover owners (among others happy for years. You will find a BM54 unit in the BMW X5; the BMW 3 series; and some Land and Range Rover models. Your owners manual should tell you what model of BM54 unit you have in your car.
The BMW BM54 repair starts with fault diagnosis so you need to tell your engineer what is wrong with the unit. Common faults in the BM54 include loss of sound to one or more channels; total loss of sound; or only some of the speakers working. Be aware that if one of your speakers is faulty, or only the speakers in one area of your vehicle are faulty, it may not be the BM54 unit at fault but wiring inside the doors.
You can have your BM54 unit checked for faults in situ before you send it off for the BMW BM54 repair. It is best to do this because otherwise you wont know for sure that it is the unit itself causing the problem. And of course if you send that unit off without a problem,, it will come back not needing fixing and youll still have that problem plus you will have had to pay the BMW BM54 repair centre for its time.
If youre not sure where to get a BM54 checked before repair, you can ask the centre to which you are sending it to do a full BMW diagnostic check on it before they start to repair it. That means youll pay no more than you would if you had it checked anywhere else and if the BMW BM54 repair is not needed, you wont have put yourself out of pocket in any way.
Every BM54 unit is located in a slightly different place generally in the boot well, under the spare tyre. For instructions on removing the BM54 unit prior to the BMW BM54 repair, refer to blogs or have a look in your manufacturers manual. If you have any questions contact the company thats going to do your diagnosis and repair and ask their advice.
